Another bead roller conversion

I just finished the third and final power drive conversion on my bead roller. First try was a HF 120v hoist motor worked great but no speed control, the second attempt was using a treadmill motor and controller but the speed controller would start at too fast a speed then adjust up and down ant the tq was not the best. This one is great I used a 12vdc wondermotor and 120 to 12v power supply and motor controller.
My bead roller is home made but not by me, a fellow in Fl made it for me. He has videos on you tube under courtjester I think. Here are some pictures.



Attachment 1708

Attachment 1709

Attachment 1710

Attachment 1711

Attachment 1707

I also built a foot pedal to control the speed from a crawl to full speed. The foot pedal was also with help from court jester. Thanks tom
pictures in next post
Ray

Here are some pictures of the foot pedal fabrication.

Here is some of the work I have used it on.

Attachment 1718

Attachment 1720

Attachment 1721

Yeah its a neon drag car Built by my son and I in our home shop..........But don't laugh..............It runs 10.3 at 143 in the 1/4 mile :O and I have videos to prove it :D

That's a complicated build, beyond my abilities for sure, nice work, for a kid of only 62 years you are showing great potential. heh heh

Quote:

---

Originally Posted by geezer

That's a complicated build, beyond my abilities for sure, nice work, for a kid of only 62 years you are showing great potential. heh heh

---

Geezer
I don't believe that at all, with the advice you have given me I know better. You like most of us on here can do about what ever you set your mind to..
I did not come up with that build myself but rather picked up an idea here and there while searching the web, I also had a lot of help from people that I have never met in person but they were willing to share their knowledge and experience with me. The idea , and even some parts for the foot pedal were given to me by Court jester you need to check out his videos on you tube he his quite a smart guy.
I try to share what little I know on this and other forums in hopes of paying back a portion of all the help, skill and knowledge I have received.

that foot pedal looks like something off the space shuttle!

I wonder if some of the same ideas could be applied to the Everlast pedal in order to give the user a pedal that is flat on the floor? Then again, I know the Everlast pedal has been redesigned since mine was built, maybe they already have something like this.

Having controlable power on there will make all the difference, especially when doing curves or other intricate shapes.

Glen

And by Space shuttle you mean based on 60's era Apollo program technology?

Wruehl
I think he was referring to the PRE 60s cartoon space shuttles you know the ones..................piloted by some crazy rodent or the like.

Warntorn
Thanks for the compliment, it made me :D:D

you got it, it looks like it was made by a mad scientist with hair sticking out in all directions!

Glen

Quote:

---

Originally Posted by worntorn

you got it, it looks like it was made by a mad scientist with hair sticking out in all directions!

Glen

---

How did you know that? you are very intuitive. :O

Looks great, found the vids on youtube, awesome.

some questions

Are both rollers powerfed?

Looks like a power supply from a computer, they have a 3V 5V and 12V output, will that work?

second, is that a wipermotor? and what make model, because I know some are very short, and could you post up a schematic? wondering how you wired up the rheostat or variable potentiometer or whatever?

Nice work man.

scratchstart
The motor is from Wondermotor on E bay but Google wondermotor.com and you will get their site. they have a great selection of motors and Seing the owner worked with me to get the best one, he will know what you need if you tell him it was for the Bead roller Ray Built. Do not get their power supply I got one on line from virtual village that is higher in amperage.
The motor comes with a rheostat but I put a 5k in the foot pedal and wired it like the factory one. If you go that route PM me and I will help you all I cacn
Ray

thanks for the info, I'm going to order the northern tool roller, and beef it up. does your roller have the sam quick adjust lever courtjester uses? and if so do you have any idea where to get the little lever? looks like a quick-set but I can't find one that is the same... I think that is the way to go, no more adjusting with an allen wrench, just unclamp, adjust the bolt a little, and re-clamp.

are both dies on yours power feed?

do you think it would be worthwhile to try and lenghthen the throat on the northern tool roller? is 18" deep enough to roll that awesome door panel on the neon? that is the type of project I'll most likely be doing, inner fenders, door panels.... for my rock crawler...

thanks for the info, and thanks for the info on courtjester, he is very nice guy and e-mailed me back same day, has 1 bead roller for sale still or offered his help in building my own... an awesome guy for sure.

Nice job!

:)