New member from Alberta with I-Tig 200

Hello everyone

First I'll start off on some info on myself. I'm a student right now taking electrical engineering and I am building an RB powered Laurel in my spare time(which is seeming to disappear more and more lately!) I have done MIG before when I was younger building some small things. I tried TIG with a friends Miller Maxstar and I knew I wanted a TIG for my car project right then. Since 90% of what I build will be stainless/carbon steel a DC only machine was not ruled out.

I bought an I-Tig 200 from Duncan the day after new years. It arrived with the pedal out of the box and all bent up. A quick email to Duncan and a new one was sent out which I received a few days later.

A couple months have passed and I have had some time to test the machine. Overall I must say I am quite pleased with this machine. Some huge bang for the buck thats for sure.

When I first unboxed it:
http://i28.photobucket.com/albums/c2...a/f92f6af8.jpg

I bought the strong hand NOMAD portable welding table. I'm really glad I bought it, really nice for doing smaller fabrication work:
http://i28.photobucket.com/albums/c2...a/993eaabe.jpg

My first few practice passes with the machine. 3/32 thoriated, 1/16 308L:
http://i28.photobucket.com/albums/c2...a/c10e663b.jpg

And using up some scraps:
http://i28.photobucket.com/albums/c2...a/DSC09194.jpg

I realize this stuff isn't the greatest work but I'm showing what I did with it in the first 30 minutes of using it. I'm learning.

Now I'm afraid I have to voice the only thing I am disappointed in. There is no control on what amperage range the pedal uses. It is always 0-200A which can make welding thinner stuff difficult when you have to ever so slightly baby the pedal. I have been experimenting with pulse so I don't have to do this.

And if anyone cares, the project car. It is a 1989 Nissan Laurel with an RB25 swapped in. It put down 465@the rear wheels this summer.

http://i28.photobucket.com/albums/c2...a/DSC00639.jpg

And the dyno video:

http://www.youtube.com/watch?v=EdlzkxypdxU

Welcome to the group, for a fellow that claims to have only 30 minutes experience you certainly seem to have caught on to technique. This forum is a good one mostly people like yourself , newbies and a few old dog's thrown in,learning from each other and exchanging idea's which makes us all the wiser.