Share
Results 1 to 4 of 4

Thread: Torch type to purchase accesories?

  1. Default Torch type to purchase accesories?

    I purchased a powertig 225lx, or whatever the 225amp ac/dc tig is.

    I was wondering what type of torch it is. I know it is water cooled. I mean what size though. For example...

    Say I wanted to buy some cups for it. Would I buy cups for a PTA-20, DB-20 or WP-20 torch?

    Or if I wanted to buy different collet to hold different sized tungsten. Or basically anything I wanted to buy... what torch number would I buy accessories for?
    10.3 @ 134mph 1.5 60' DA 7500ft Bandimere speedway
    http://www.youtube.com/watch?v=leUB4PCv0mU

    Lincoln PT185
    1980's Miller Plasma cutter
    Everlast LX225 here and working well.

  2. #2

    Default

    I believe the stock torch is a wp18.
    Gerald

    Millermatic 251
    Spectrum 300 Plasma
    Everlast PowerTig 250EX
    Everlast PowerCool W300
    Harris / Victor OA
    Craftsman 13 Speed Drill Press
    ProTools Air/Hydraulic Bender
    48" Brake, 72" Brake, 52" Stomp Shear
    Mitler Bros. 36" High Throat Bead Roller
    Compressor, Notchers, Grinders, etc.

  3. Default

    Good question! I bought a pp256 and the upgraded torch. Please post the information on the torch I bought and I'll go ahead and get my consumables from Everlast for shipment with my 256.
    I'm asking for a post instead of a PM so that others can do the same; order extra consumables while we're hangin' out waiting for delivery.
    Last edited by ducksface; 03-19-2011 at 12:41 AM.
    I am out trying to 'find myself'. If I should wander back while I am gone, please tell me to sit quietly and wait for myself to return.

    LOTS of scuba and vintage scuba equipment [I'm Always willing to trade or buy the stuff you think is too old to use]
    Smithy XLT Mill/lathe [It was easier to learn than I thought, I'm no pro, but I can make a bearing hanger]
    Everlast PP256

  4. #4

    Default

    It's a WP-18.
    PowerTig 225LX
    PowerCool W300
    PowerPlasma 60S
    Miller 140 MIG

Similar Threads

  1. Tig torch switch type?
    By Skeeter in forum TIG Welding (GTAW/GTAW-P)
    Replies: 4
    Last Post: 01-18-2017, 04:38 AM
  2. Type of shielding gas used.
    By dyethor in forum MIG Welding (GMAW/GMAW-P/FCAW)
    Replies: 16
    Last Post: 05-01-2012, 05:18 PM
  3. Replies: 0
    Last Post: 07-09-2011, 08:01 PM
  4. torch type questions
    By Ram48 in forum TIG Welding (GTAW/GTAW-P)
    Replies: 3
    Last Post: 03-31-2011, 08:14 AM
  5. Some New Accesories
    By Titan winch in forum Everlast Announcements, Contests and Promotions
    Replies: 0
    Last Post: 05-31-2010, 04:10 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •