Picture of cupola shown in this attachment is for the vent of a pizza oven I am building for a customer. The cupola is fabricated out of 3/8th aluminum with the exception of 3/16 aluminun for the top ring that slopes inbound at the top for attaching the roof to. To get a feel for size of the unit it spans 30 inches at its widest span between two of the 6 corners and each of the 6 sided panels is 15 inches in width and about 21 inches high.

Welding is a hobby for me and I have no idea what to charge for this component of the project. It also took me way to long to do and to be honest is a bit out of my comfort zone. If my partner and I build future projects like this one I may want to get it fabricated from a professional. So my question is......any feel out there as to what a fabrication shop would charge for this unit if I just showed up with a drawing and asked them to buy materials and weld it all up?

Just some ball park figures will help me.

If anyone is interested the link below will show the documentation of the pizza oven build in progress.

https://picasaweb.google.com/waynebe...42PompeiiOven#