Share
Results 1 to 12 of 12

Thread: Add a section

  1. #1

    Default Add a section

    Hi
    I think adding a For Sale / Wanted section would be a good addition to the site. The membership is growing and if I am looking for a used tool or machine I have to go to other welding related sites. It would be nice to be able to find what I need here.
    Ray Mc
    Everlast I mig 205
    Everlast 200 amp spool gun
    Everlast 250 ex
    H. F. 12x36 lathe
    Grizzly Mill
    10,000 lb two post lift
    Box and Pan Brake
    Bead roller
    jet 5x7 horizontal band saw
    Wilton 14 inch vertical band saw
    Mitec 50 A plasma cutter.
    tool grinder
    20 ton press and press brake
    more power and hand tools then I can list here
    Dodge Neon that runs 10.23 @143 mph in the quater
    70 Chevelle convert
    It took 62 years But I finally have my dream Garage

  2. #2
    Join Date
    Oct 2010
    Location
    Northern Virginia
    Posts
    1,323

    Default

    I had that same thought the other day. Any type of long-distance purchase transaction has some uncertainty to it, and in a FS / WTB section on this board you'd have a much better shot at knowing who you're dealing with.
    DaveO
    Oxweld oxy acet gear
    IMIG 200
    PowerTIG 210 EXT... Amazing!

  3. #3

    Default

    We can take a look at it, I have been thinking about us adding a regional section as well. Any other sections?

  4. #4
    Join Date
    Oct 2010
    Location
    Northern Virginia
    Posts
    1,323

    Default

    No other section ideas, but I like the region idea. I've read a number of threads where guys figure out they're pretty near each other, and get together to work out problems or try machines. It would also be easier to transport equipment in a purchase transaction if buyers and sellers were close to each other.
    DaveO
    Oxweld oxy acet gear
    IMIG 200
    PowerTIG 210 EXT... Amazing!

  5. #5

    Default

    Quote Originally Posted by performance View Post
    We can take a look at it, I have been thinking about us adding a regional section as well. Any other sections?
    Mark I like the regional idea also It could be a great way for folks to be able to help each other out in person as well as on line
    Ray

  6. #6

    Default

    Regional would be nice, a classified section would be awesome. A classified section broken up by region would be sweet too.
    Build it, wheel it, break it, fix it, and repeat!!!!!!!

    Tools:
    Everlast SuperCut 50 Plasma
    Century 200 Mig welder
    JD2 Model 32 Tube Bender

    Toys:
    1995 Ranger 2wd regular cab - 5.0HO Conversion - Street Machine
    1993 Ranger SuperCab - 466 BBF - Extreme offroad
    1985 F250 Regular Cab 4x4 - 460 BBF - Towing Beast

  7. #7

    Default

    The forsale/wanted is a good idea, maybe I will add that today time allowing. Though it will be hard to beat Craigslist, you would know a number of the players you are dealing with. Also, most people here have heavy tools, so not sure on that one.

    The region idea is good, but I think it would be better by state and a lot of work.

    I know Mark would drive a state or two or three to help someone, where me, I will go 1-2 hours and you better have some hunting or fishing, something to ride/drive when we are done.

    Mark, let me know your thoughts on the regional sections. I'd hate to add 50 states and see Texas with 200 and others with no one, but also think Southeast and the number of states it covers and distance and no one willing to travel.
    Mike R.
    Email: admineverlast@everlastwelders.com
    www.everlastgenerators.com
    www.everlastwelders.com
    877-755-9353 x203
    M-F 12 - 7PM PST
    FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.

  8. #8

    Default

    Quote Originally Posted by everlastsupport View Post
    The forsale/wanted is a good idea, maybe I will add that today time allowing. Though it will be hard to beat Craigslist, you would know a number of the players you are dealing with. Also, most people here have heavy tools, so not sure on that one.

    The region idea is good, but I think it would be better by state and a lot of work.

    I know Mark would drive a state or two or three to help someone, where me, I will go 1-2 hours and you better have some hunting or fishing, something to ride/drive when we are done.

    Mark, let me know your thoughts on the regional sections. I'd hate to add 50 states and see Texas with 200 and others with no one, but also think Southeast and the number of states it covers and distance and no one willing to travel.
    I don't see a need to add 50 states. Regional sections would work just fine.
    Gerald

    Millermatic 251
    Spectrum 300 Plasma
    Everlast PowerTig 250EX
    Everlast PowerCool W300
    Harris / Victor OA
    Craftsman 13 Speed Drill Press
    ProTools Air/Hydraulic Bender
    48" Brake, 72" Brake, 52" Stomp Shear
    Mitler Bros. 36" High Throat Bead Roller
    Compressor, Notchers, Grinders, etc.

  9. #9

    Default

    Start small and grow into it.
    Classified and regional say north east, South east, South, Central North and south west yo start. Its not so much about how far someone wil travel to henp but more about finding members closer to you for what ever reason be it help swapping ideas or parts and tools.
    For example. Here is how a dodge SRT forum does it

    US Regional Forums
    New England NY/NJ/PA
    Mid-Atlantic Area South/Southeast
    Florida Forums Midwest
    Great Plains Texas
    Mountain (1309/17824) Southwest (3614/62633)
    California Forums Northwest
    International Forums
    Canadian Mexican Forums (121/1551)
    Overseas/Foreign (2873/42123)
    Everlast I mig 205
    Everlast 200 amp spool gun
    Everlast 250 ex
    H. F. 12x36 lathe
    Grizzly Mill
    10,000 lb two post lift
    Box and Pan Brake
    Bead roller
    jet 5x7 horizontal band saw
    Wilton 14 inch vertical band saw
    Mitec 50 A plasma cutter.
    tool grinder
    20 ton press and press brake
    more power and hand tools then I can list here
    Dodge Neon that runs 10.23 @143 mph in the quater
    70 Chevelle convert
    It took 62 years But I finally have my dream Garage

  10. #10

    Default

    I see that the "For Sales/ Wanted" category is up, but no postings yet. I have an engine and trans that I need gone. Will try to get something together.
    Tony
    Everlast PowerPro 256
    AC225 "Tombstone"
    HF 20 ton press
    Rotary 9000# two-post

  11. #11
    Join Date
    Oct 2010
    Location
    Northern Virginia
    Posts
    1,323

    Default

    Hard to compete with something as national and established as Craig's List, but this forum provides the "I know a guy that knows a guy that wants to sell one of those" aspect that CL cannot.

    One way to regionalize the "For Sale / Want to Buy" section would be to suggest (perhaps via sticky post) that every post should carry the poster's home state (or eventually, a region name) in parentheses. That way a user could perform an advanced search looking for his home state or region in the post's title and find items that are nearby, if that's what they want. I bet, though, that people will read every post just to see what's going on.
    DaveO
    Oxweld oxy acet gear
    IMIG 200
    PowerTIG 210 EXT... Amazing!

  12. #12

    Default

    DaveO,

    I thought about that on the other request (regions). People just post where they are in the title and other just join in if they are nearby. No maintenance for us here.

    Would work great on for sale/wanted.

    Maybe we make it "For sale/Items wanted/Looking for help on a project" and they include the City/State in the title. That would mean just one forum. Sure we will be cleaning it up a lot. But a good idea.

    I figure most guys selling here are talking heavy items. I have an BIG O/A set I want to sell, but one tank alone would break the bank on shipping.
    Mike R.
    Email: admineverlast@everlastwelders.com
    www.everlastgenerators.com
    www.everlastwelders.com
    877-755-9353 x203
    M-F 12 - 7PM PST
    FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.

Similar Threads

  1. Plasam cutter section on board ??
    By Rodsmachineshop in forum Everlast Plasma Cutters (PAC)
    Replies: 0
    Last Post: 05-08-2012, 06:50 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •