Share
Page 1 of 7 123 ... LastLast
Results 1 to 20 of 140

Thread: Delivery Date for Early april order

  1. #1

    Default Delivery Date for Early april order

    Delivery should still be on Monday, the 11th. By Tuesday, we hope all orders will start going out full swing.

    As a side note people should confirm their new invoice, and tracking and what ever you have. IF you don't have something you think you should have...please call or email. Volumes will be heavy for shipping. I expect over 250-300 units will ship within a couple days...with more orders piling in upon arrival.

  2. #2
    Join Date
    Feb 2011
    Location
    West Palm Beach Fl.
    Posts
    68

    Default

    Thanks for the update Mark . Sounds like the folks in Califonia will have a very busy week.
    Power Tig 250 EX
    Miller 211 Mig
    Hobart Stickmate LX
    Victor Torch

  3. Default

    Is now the time to order my cooler, or after the rush of crazy work you have going?
    I am out trying to 'find myself'. If I should wander back while I am gone, please tell me to sit quietly and wait for myself to return.

    LOTS of scuba and vintage scuba equipment [I'm Always willing to trade or buy the stuff you think is too old to use]
    Smithy XLT Mill/lathe [It was easier to learn than I thought, I'm no pro, but I can make a bearing hanger]
    Everlast PP256

  4. #4

    Default

    LOL...I just saw your original wording. Thank goodness for editing huh?

    Honestly, I'd go ahead and order. Water cooler sales are strange. A lot of preorder guys have had time to sit and think about their purchase or coughed up a few extra bucks and decide to have a water cooler shipped at the last minute...IF it were up to me, I'd price every unit with a water cooler and sell 1 for 1, since that seems to be the biggest issue most people have about not being able to take advantage of all the power.

  5. Default

    The subtleties of conversation allude me in type. It sure didn't look like what I meant so I had to do the edit.
    I'll try to remember to order the cooler tomorrow. I feel silly ordering it, I feel silly building my own....
    You guys need to start selling 220 outlets and cords. Drop shipped would work fine. Even if you made nothing on them it allows a complete package.
    I am out trying to 'find myself'. If I should wander back while I am gone, please tell me to sit quietly and wait for myself to return.

    LOTS of scuba and vintage scuba equipment [I'm Always willing to trade or buy the stuff you think is too old to use]
    Smithy XLT Mill/lathe [It was easier to learn than I thought, I'm no pro, but I can make a bearing hanger]
    Everlast PP256

  6. #6

    Default

    The water cooler will plug into the back of the 250 ex units and all the powertigs.

  7. #7

    Default

    That's Good news... I ordered my PP256 on 2/14/11 and its still M.I.A. When do I get a tracking#?
    I know they are doing the best they can BUT.. I know my patience is wearing thin with all this waiting!!
    Donald Eastman... AKA: scorp765

    Hobart Handler 135
    PowerPro 256
    All kinds of air tools, cutters, sanders, sheers...
    Old sears Air compressor (big one)
    tons of hand tools, and electric ones too.
    Water cooler for the 256 ...maybe soon!

    And I cant forget My... 2005 YAMAHA R1

    From: Oceanside, California

  8. #8

    Default

    Quote Originally Posted by performance View Post
    Delivery should still be on Monday, the 11th. By Tuesday, we hope all orders will start going out full swing.

    As a side note people should confirm their new invoice, and tracking and what ever you have. IF you don't have something you think you should have...please call or email. Volumes will be heavy for shipping. I expect over 250-300 units will ship within a couple days...with more orders piling in upon arrival.
    Well I guess I better call then, I never got anything that resembled a confirmed order except my PayPal receipt.
    Big Willy in Rockford, Il. Power Pro 205, Lincoln 140 Mig, Oxy/Acetylene rig with a Cobra Torch, Full up Motorcycle shop.
    http://projectoldwing.com
    wruehl@hotmail.com
    Active Ironbutt Member.

  9. #9

    Default

    I would imagine that they will provide us a tacking number after our orders ship from California. They won't have a number until they create the slip for shipment.
    Jason
    Everlast 255EXT - Perfection
    Everlast PowerPro 256 - UPS Demolished
    Everlast MTS200s
    12 Ton Shop Press
    DeWalt Hand Tools/ChopSaw

  10. #10

    Default

    We are trying to get a little more consistency in that department. Some may have a tracking number, other not...depending upon what they purchased, and when. We are working on some improvements...I suspect, though that some units may already be on the way before the tracking numbers are active, due to scanning the packages en route the way UPS does with large multi package shipments.

  11. #11

    Default

    Quote Originally Posted by Jason View Post
    I would imagine that they will provide us a tacking number after our orders ship from California. They won't have a number until they create the slip for shipment.
    I was referring to some sort of order communication that states things like item, quantity, anticipated ship date, payment received, shipping address, etc. I'm aware the tracking number won't be available until the shipment data is entered. To my knowledge the tracking number is generated when the label is. Tracking data won't be available until the parcel starts moving through the carrier, but the tracking number is generated when the lable is issued.
    Big Willy in Rockford, Il. Power Pro 205, Lincoln 140 Mig, Oxy/Acetylene rig with a Cobra Torch, Full up Motorcycle shop.
    http://projectoldwing.com
    wruehl@hotmail.com
    Active Ironbutt Member.

  12. Default

    Hey Mark,
    Would it be better to wait until Tuesday then to swing by the SSF office to pick up a 250EX?

    -don
    Whitcomb Blaisdell lathe
    Grizzly G0613 Swivel headed bandsaw
    Everlast 200DX Tig
    Miller Millermatic 251 Mig
    Miller Spectrum 2050 Plasma
    Hobart Handler 187 Mig
    Delta 16' Drill Press
    6'X3'X3' Powdercoating oven
    ========================
    www.spontaneousfire.com
    www.fishbug.net
    www.temple2010.org

  13. #13

    Default

    Yes, but you need to arrange the visit to make sure someone can walk you through. I am sure orders will still be flying.

  14. #14

    Default

    when the units go out, how long will it take to ship from SSF area to Los Angeles area via the shipper you use, I found out today my parents are going out of town next week and I may have to change ship to: addy so It doesn't sit at the doorstep for a few days. I'm close in terms of most others if it may be the same week I may have to give Katya a call and change it.


    Don

    MTS 200 workhorse
    PowerTig 250EX <---sweet
    80 amp HF inverter arc welder
    Lincoln Buzzbox
    Rotobrute AC-35 Mag Drill
    Milwaukee mag drill
    HF Heavy Duty 16 Speed Bench Drill Press (Custom made Adjustable Height stand)

    I gotta find more junk to sell on EBaY ... Must Buy a Plasma Cutter and a Mig Welder


    Fullerton, Ca
    USA

  15. #15

    Default

    about a day or so.

  16. #16

    Default

    Quote Originally Posted by wruehl View Post
    I was referring to some sort of order communication that states things like item, quantity, anticipated ship date, payment received, shipping address, etc. I'm aware the tracking number won't be available until the shipment data is entered. To my knowledge the tracking number is generated when the label is. Tracking data won't be available until the parcel starts moving through the carrier, but the tracking number is generated when the lable is issued.
    That is usually correct and I was also answering the guy who posted above you. Sorry if it sounded like I was being a smart ### to you.. Was not intended
    Jason
    Everlast 255EXT - Perfection
    Everlast PowerPro 256 - UPS Demolished
    Everlast MTS200s
    12 Ton Shop Press
    DeWalt Hand Tools/ChopSaw

  17. #17

    Default

    Quote Originally Posted by Jason View Post
    That is usually correct and I was also answering the guy who posted above you. Sorry if it sounded like I was being a smart ### to you.. Was not intended
    No problem bro, no harm, no foul. Peace.
    Big Willy in Rockford, Il. Power Pro 205, Lincoln 140 Mig, Oxy/Acetylene rig with a Cobra Torch, Full up Motorcycle shop.
    http://projectoldwing.com
    wruehl@hotmail.com
    Active Ironbutt Member.

  18. #18

    Default

    yep this is the interweb LOL I'm not offended by anything anyone says on forums unintentional or intentional, the nice guys like the guy above me I would hope to meet some day others I forget about. So far I have yet to see anyone on the Everlast forums intentionally try to cause grief to anyone and if it has happened I am sure the ole ban stick is swung really quickly by the mods. I always assume when something looks or sounds wierd when posted it a typo of just mis-worded.

    No harm no foul, we're all friends here unlike some other forums where it's all about being perfect and who's got the biggest e-peen LOL

    Mark: thanks for the update will call Katya on monday and possibly have shipping changeg back to my apt. I may get evicted though if the Mgr. see's UPS wheeling in a Powertig 250 ROFL
    Don

    MTS 200 workhorse
    PowerTig 250EX <---sweet
    80 amp HF inverter arc welder
    Lincoln Buzzbox
    Rotobrute AC-35 Mag Drill
    Milwaukee mag drill
    HF Heavy Duty 16 Speed Bench Drill Press (Custom made Adjustable Height stand)

    I gotta find more junk to sell on EBaY ... Must Buy a Plasma Cutter and a Mig Welder


    Fullerton, Ca
    USA

  19. #19

    Default

    Huston has the eagle landed?
    sold my miller mig
    got a PT250EX
    saving up for a plasma cutter

  20. #20

    Default

    I am hoping the lack of a reply mean everyone at everlast is busy labeling and getting all the new machines ready to send out.
    sold my miller mig
    got a PT250EX
    saving up for a plasma cutter

Similar Threads

  1. Shipping date?
    By Rambozo in forum Pre-sales, Sales and Shipping questions
    Replies: 1
    Last Post: 06-10-2014, 09:56 PM
  2. Powerpro 256s shipping date
    By jpmitch in forum Pre-sales, Sales and Shipping questions
    Replies: 5
    Last Post: 12-05-2013, 11:05 PM
  3. PT200DX arrived early
    By willida in forum Customer Testimonials
    Replies: 4
    Last Post: 12-15-2012, 08:54 PM
  4. Did You Get a New Machine In April
    By bigjoeinkg in forum Everlast Announcements, Contests and Promotions
    Replies: 20
    Last Post: 05-11-2011, 01:34 AM
  5. April Machines
    By bigjoeinkg in forum Everlast Announcements, Contests and Promotions
    Replies: 9
    Last Post: 04-21-2011, 03:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •