Does this include carts and water coolers? They were supposed to be here back in Feb and I still haven't heard or seen anything on them. Thanks!
Does this include carts and water coolers? They were supposed to be here back in Feb and I still haven't heard or seen anything on them. Thanks!
Oleg Gladshteyn
Phone: 650 588 8082 / 877 755 WELD
Cell: 415 613 6664 ONLY IF YOU REALLY NEED IT
Email: oleg@everlastwelders.com
Website www.everlastgenerators.com
www.linkedin.com/pub/oleg-gladshteyn/48/b08/875
Oleg Gladshteyn
Phone: 650 588 8082 / 877 755 WELD
Cell: 415 613 6664 ONLY IF YOU REALLY NEED IT
Email: oleg@everlastwelders.com
Website www.everlastgenerators.com
www.linkedin.com/pub/oleg-gladshteyn/48/b08/875
Miller Bobcat 3 Phase,
Miller Suitcase X-Treme 12VS wire feeder for the Bobcat with M-25 300A .045" gun / Bernard 400A 5/64" wire mig gun .
26 series gas cooled TIG torch, setup for quick connect to Bobcat.
17 series gas cooled Tig Torch for Low Amp Solar Tig (Direct Solar Panel Powered Tig welding)
Hobart Handler 187 Mig / Fluxcore
EVERLAST PowerUltra 205P
EVERLAST PowerTig 250 EXT 2013 Model
Same here with lined up projects. I was hoping to get it while it was still cool out as I have much less free time now that the weather is nicer but oh well.
I still have the same thing on my UPS notification ( A shipping label was created ) . That means not out yet huh?. Think Ill go to disneyland tomorrow, friend gave me a one day pass good till the end of this month. Ill cruise about in my power wheelchair and try not to get kicked out for speeding like that one lady did.
I'm bringing my own food and bevs in my backpack and I'll just watch all the kids running around like wildcats with their parents trying to keep up LOL. Havent been in 20 years and want to see what the new part they added a few years back looks like .
Thanks for all your hard work Everlast team, I know your swamped and I feel for ya all. Keep up the great work.
Don
MTS 200 workhorse
PowerTig 250EX <---sweet
80 amp HF inverter arc welder
Lincoln Buzzbox
Rotobrute AC-35 Mag Drill
Milwaukee mag drill
HF Heavy Duty 16 Speed Bench Drill Press (Custom made Adjustable Height stand)
I gotta find more junk to sell on EBaY ... Must Buy a Plasma Cutter and a Mig Welder
Fullerton, Ca
USA
Don
100% of the units went out ! All were picked up
6 trucks went out in total. UPS guys did not scan each box
So once the will hit the hub will get a scan ,wait few more hours
oleg
Oleg Gladshteyn
Phone: 650 588 8082 / 877 755 WELD
Cell: 415 613 6664 ONLY IF YOU REALLY NEED IT
Email: oleg@everlastwelders.com
Website www.everlastgenerators.com
www.linkedin.com/pub/oleg-gladshteyn/48/b08/875
My helmet is here at my house! does this make me the first delivery of the new batch?
I am out trying to 'find myself'. If I should wander back while I am gone, please tell me to sit quietly and wait for myself to return.
LOTS of scuba and vintage scuba equipment [I'm Always willing to trade or buy the stuff you think is too old to use]
Smithy XLT Mill/lathe [It was easier to learn than I thought, I'm no pro, but I can make a bearing hanger]
Everlast PP256
Don
MTS 200 workhorse
PowerTig 250EX <---sweet
80 amp HF inverter arc welder
Lincoln Buzzbox
Rotobrute AC-35 Mag Drill
Milwaukee mag drill
HF Heavy Duty 16 Speed Bench Drill Press (Custom made Adjustable Height stand)
I gotta find more junk to sell on EBaY ... Must Buy a Plasma Cutter and a Mig Welder
Fullerton, Ca
USA
The machines are on the way!!! OMG... I about had a hart attack when i saw the tracking info! I should get my PP256 on Wed. 4-20-11.... SWEET!!!!!!!!!!
Donald Eastman... AKA: scorp765
Hobart Handler 135
PowerPro 256
All kinds of air tools, cutters, sanders, sheers...
Old sears Air compressor (big one)
tons of hand tools, and electric ones too.
Water cooler for the 256 ...maybe soon!
And I cant forget My... 2005 YAMAHA R1
From: Oceanside, California
Mine should arrive on Friday. I can't wait for it to get here. One thing though, I know you said all units have gone out but did this include the Flexhead torches? I have 2 tracking numbers and the one for the unit has been updated but the other has not. I assume its just taking UPS a little time or I hope but I thought I would make sure they too went out.
Jason
Everlast 255EXT - Perfection
Everlast PowerPro 256 - UPS Demolished
Everlast MTS200s
12 Ton Shop Press
DeWalt Hand Tools/ChopSaw
woot will get mine on wed. also. gotta update my sig now
Don
MTS 200 workhorse
PowerTig 250EX <---sweet
80 amp HF inverter arc welder
Lincoln Buzzbox
Rotobrute AC-35 Mag Drill
Milwaukee mag drill
HF Heavy Duty 16 Speed Bench Drill Press (Custom made Adjustable Height stand)
I gotta find more junk to sell on EBaY ... Must Buy a Plasma Cutter and a Mig Welder
Fullerton, Ca
USA
looks like mine will be here on the 26th. I think UPS uses rickshaws to move goods from the west coast to the east. Works out fine though-I won't be here all this weekend anyway so next week is better. Can't wait to get it!
looks like UPS plans to drop mine off on Friday - So like a good reason to take a day off work
sold my miller mig
got a PT250EX
saving up for a plasma cutter
4-20, end of day for my delivery.
Everyone be sure to check the units upon delivery.
Someone else took delivery for me [who never thinks of such things] opened my hood because the box was so badly beaten up.
I am out trying to 'find myself'. If I should wander back while I am gone, please tell me to sit quietly and wait for myself to return.
LOTS of scuba and vintage scuba equipment [I'm Always willing to trade or buy the stuff you think is too old to use]
Smithy XLT Mill/lathe [It was easier to learn than I thought, I'm no pro, but I can make a bearing hanger]
Everlast PP256
Looks like my cooler is on its way delivery is scheduled for 4/25 I hope UPS handles it carefully.
Power Tig 250 EX
Miller 211 Mig
Hobart Stickmate LX
Victor Torch
Well Ive tried calling and leaving messages with no replies on my order but when I go back and check the UPS tracking numbers from January when the shipping labels were created it says that the labels have been created and they are waiting on the products. Hopefully new labels were created since then because I moved and contacted everlast through email with my new address but never received confirmation. Would hate to see all that stuff be shipped to the wrong place. Plus it just gets frustrating waiting on something for so long and no communication on the status of stuff but yet I see all of these other posts with people having their items shipped
Mine looks like Monday the 25th. On sunday, the header on my bike broke at 361 HP. I was planning on pushing it up over 30 psi boost, but tuning got cut short. Now I will have another welding project for the bike, this time with a header made of Schedule 10 weld Ells.
John
Everlast 200DX
Everlast PT185
Shoptask 3-in-1 (not currently in my garage, but I own it...)
Any day on a motorcycle like this that ends just needing parts and labor is a good day.
4.82, 158.67mph 1/8th mile 7.350, 200.35mph 1/4 mile