Share
Page 6 of 7 FirstFirst ... 4567 LastLast
Results 101 to 120 of 140

Thread: Delivery Date for Early april order

  1. Default

    Does this include carts and water coolers? They were supposed to be here back in Feb and I still haven't heard or seen anything on them. Thanks!

  2. #102

    Default

    Quote Originally Posted by Timberwolf View Post
    Does this include carts and water coolers? They were supposed to be here back in Feb and I still haven't heard or seen anything on them. Thanks!
    Yes sir, ALL coolers and carts came in !!!
    Oleg Gladshteyn
    Phone: 650 588 8082 / 877 755 WELD
    Cell: 415 613 6664 ONLY IF YOU REALLY NEED IT
    Email: oleg@everlastwelders.com
    Website www.everlastgenerators.com

    www.linkedin.com/pub/oleg-gladshteyn/48/b08/875

  3. #103

    Default

    Quote Originally Posted by dgarnier View Post
    It a little uneasy to 'hang in there' when we have been given dates that come and go and then no feed back form Everlast. Last word found was an email wit ha 4/10 date, since then I dont recall seeing anything from everlast. There were some comments that Oleg had said Friday, but a post form someone at everlast with a few details of what happened and what the next ETA is going to be nice.
    dgarnier

    when you're ready for palsma cutter call me direct, i will take care of you as well !
    Oleg Gladshteyn
    Phone: 650 588 8082 / 877 755 WELD
    Cell: 415 613 6664 ONLY IF YOU REALLY NEED IT
    Email: oleg@everlastwelders.com
    Website www.everlastgenerators.com

    www.linkedin.com/pub/oleg-gladshteyn/48/b08/875

  4. #104
    Join Date
    Mar 2011
    Location
    The Boonies of Texas
    Posts
    420

    Default

    Quote Originally Posted by Oleg View Post
    UPDATE: rest of the units will be picked up today by UPS with in new few hours. They are picking them up in bulk. Just scanning the batch clip. Tracking will be delayed because of that.
    So give it GOOD few hours.

    I am very sorry for such deally of this shipment
    Great to hear. I have had time to plan several projects for my new plasma cutter and I am getting excited to be able to use it soon.

    Thurmond
    Miller Bobcat 3 Phase,
    Miller Suitcase X-Treme 12VS wire feeder for the Bobcat with M-25 300A .045" gun / Bernard 400A 5/64" wire mig gun .
    26 series gas cooled TIG torch, setup for quick connect to Bobcat.
    17 series gas cooled Tig Torch for Low Amp Solar Tig (Direct Solar Panel Powered Tig welding)
    Hobart Handler 187 Mig / Fluxcore
    EVERLAST PowerUltra 205P
    EVERLAST PowerTig 250 EXT 2013 Model

  5. Default

    Same here with lined up projects. I was hoping to get it while it was still cool out as I have much less free time now that the weather is nicer but oh well.

  6. #106

    Default

    I still have the same thing on my UPS notification ( A shipping label was created ) . That means not out yet huh?. Think Ill go to disneyland tomorrow, friend gave me a one day pass good till the end of this month. Ill cruise about in my power wheelchair and try not to get kicked out for speeding like that one lady did.

    I'm bringing my own food and bevs in my backpack and I'll just watch all the kids running around like wildcats with their parents trying to keep up LOL. Havent been in 20 years and want to see what the new part they added a few years back looks like .

    Thanks for all your hard work Everlast team, I know your swamped and I feel for ya all. Keep up the great work.
    Don

    MTS 200 workhorse
    PowerTig 250EX <---sweet
    80 amp HF inverter arc welder
    Lincoln Buzzbox
    Rotobrute AC-35 Mag Drill
    Milwaukee mag drill
    HF Heavy Duty 16 Speed Bench Drill Press (Custom made Adjustable Height stand)

    I gotta find more junk to sell on EBaY ... Must Buy a Plasma Cutter and a Mig Welder


    Fullerton, Ca
    USA

  7. #107

    Default

    Don
    100% of the units went out ! All were picked up
    6 trucks went out in total. UPS guys did not scan each box
    So once the will hit the hub will get a scan ,wait few more hours


    oleg
    Oleg Gladshteyn
    Phone: 650 588 8082 / 877 755 WELD
    Cell: 415 613 6664 ONLY IF YOU REALLY NEED IT
    Email: oleg@everlastwelders.com
    Website www.everlastgenerators.com

    www.linkedin.com/pub/oleg-gladshteyn/48/b08/875

  8. Default

    My helmet is here at my house! does this make me the first delivery of the new batch?
    I am out trying to 'find myself'. If I should wander back while I am gone, please tell me to sit quietly and wait for myself to return.

    LOTS of scuba and vintage scuba equipment [I'm Always willing to trade or buy the stuff you think is too old to use]
    Smithy XLT Mill/lathe [It was easier to learn than I thought, I'm no pro, but I can make a bearing hanger]
    Everlast PP256

  9. #109

    Default

    Quote Originally Posted by Oleg View Post
    Dan
    100% of the units went out ! All were picked up
    6 trucks went out in total. UPS guys did not scan each box
    So once the will hit the hub will get a scan ,wait few more hours


    oleg
    Ok, thank you for your hard work in making this all happen to the best of you ability and resources, you and the Everlaast team Rock
    Don

    MTS 200 workhorse
    PowerTig 250EX <---sweet
    80 amp HF inverter arc welder
    Lincoln Buzzbox
    Rotobrute AC-35 Mag Drill
    Milwaukee mag drill
    HF Heavy Duty 16 Speed Bench Drill Press (Custom made Adjustable Height stand)

    I gotta find more junk to sell on EBaY ... Must Buy a Plasma Cutter and a Mig Welder


    Fullerton, Ca
    USA

  10. #110

    Default

    The machines are on the way!!! OMG... I about had a hart attack when i saw the tracking info! I should get my PP256 on Wed. 4-20-11.... SWEET!!!!!!!!!!
    Donald Eastman... AKA: scorp765

    Hobart Handler 135
    PowerPro 256
    All kinds of air tools, cutters, sanders, sheers...
    Old sears Air compressor (big one)
    tons of hand tools, and electric ones too.
    Water cooler for the 256 ...maybe soon!

    And I cant forget My... 2005 YAMAHA R1

    From: Oceanside, California

  11. #111

    Default

    Mine should arrive on Friday. I can't wait for it to get here. One thing though, I know you said all units have gone out but did this include the Flexhead torches? I have 2 tracking numbers and the one for the unit has been updated but the other has not. I assume its just taking UPS a little time or I hope but I thought I would make sure they too went out.
    Jason
    Everlast 255EXT - Perfection
    Everlast PowerPro 256 - UPS Demolished
    Everlast MTS200s
    12 Ton Shop Press
    DeWalt Hand Tools/ChopSaw

  12. #112

    Default

    woot will get mine on wed. also. gotta update my sig now
    Don

    MTS 200 workhorse
    PowerTig 250EX <---sweet
    80 amp HF inverter arc welder
    Lincoln Buzzbox
    Rotobrute AC-35 Mag Drill
    Milwaukee mag drill
    HF Heavy Duty 16 Speed Bench Drill Press (Custom made Adjustable Height stand)

    I gotta find more junk to sell on EBaY ... Must Buy a Plasma Cutter and a Mig Welder


    Fullerton, Ca
    USA

  13. Default

    looks like mine will be here on the 26th. I think UPS uses rickshaws to move goods from the west coast to the east. Works out fine though-I won't be here all this weekend anyway so next week is better. Can't wait to get it!

  14. #114

    Default

    looks like UPS plans to drop mine off on Friday - So like a good reason to take a day off work
    sold my miller mig
    got a PT250EX
    saving up for a plasma cutter

  15. Default

    4-20, end of day for my delivery.
    Everyone be sure to check the units upon delivery.
    Someone else took delivery for me [who never thinks of such things] opened my hood because the box was so badly beaten up.
    I am out trying to 'find myself'. If I should wander back while I am gone, please tell me to sit quietly and wait for myself to return.

    LOTS of scuba and vintage scuba equipment [I'm Always willing to trade or buy the stuff you think is too old to use]
    Smithy XLT Mill/lathe [It was easier to learn than I thought, I'm no pro, but I can make a bearing hanger]
    Everlast PP256

  16. Default

    Quote Originally Posted by haveissues View Post
    looks like mine will be here on the 26th. I think UPS uses rickshaws to move goods from the west coast to the east. Works out fine though-I won't be here all this weekend anyway so next week is better. Can't wait to get it!
    That's why it's called "UPS Ground Service."
    David Shearer
    Machine Shop Services
    Arroyo Grande, CA
    davidshearer1956@gmail.com

  17. Default

    Quote Originally Posted by DavidShearer View Post
    That's why it's called "UPS Ground Service."
    Thanks for clearing that up.

  18. #118
    Join Date
    Feb 2011
    Location
    West Palm Beach Fl.
    Posts
    68

    Default

    Looks like my cooler is on its way delivery is scheduled for 4/25 I hope UPS handles it carefully.
    Power Tig 250 EX
    Miller 211 Mig
    Hobart Stickmate LX
    Victor Torch

  19. Default

    Well Ive tried calling and leaving messages with no replies on my order but when I go back and check the UPS tracking numbers from January when the shipping labels were created it says that the labels have been created and they are waiting on the products. Hopefully new labels were created since then because I moved and contacted everlast through email with my new address but never received confirmation. Would hate to see all that stuff be shipped to the wrong place. Plus it just gets frustrating waiting on something for so long and no communication on the status of stuff but yet I see all of these other posts with people having their items shipped

  20. #120

    Default

    Mine looks like Monday the 25th. On sunday, the header on my bike broke at 361 HP. I was planning on pushing it up over 30 psi boost, but tuning got cut short. Now I will have another welding project for the bike, this time with a header made of Schedule 10 weld Ells.

    John
    Everlast 200DX
    Everlast PT185
    Shoptask 3-in-1 (not currently in my garage, but I own it...)

    Any day on a motorcycle like this that ends just needing parts and labor is a good day.
    4.82, 158.67mph 1/8th mile 7.350, 200.35mph 1/4 mile

Similar Threads

  1. Shipping date?
    By Rambozo in forum Pre-sales, Sales and Shipping questions
    Replies: 1
    Last Post: 06-10-2014, 09:56 PM
  2. Powerpro 256s shipping date
    By jpmitch in forum Pre-sales, Sales and Shipping questions
    Replies: 5
    Last Post: 12-05-2013, 11:05 PM
  3. PT200DX arrived early
    By willida in forum Customer Testimonials
    Replies: 4
    Last Post: 12-15-2012, 08:54 PM
  4. Did You Get a New Machine In April
    By bigjoeinkg in forum Everlast Announcements, Contests and Promotions
    Replies: 20
    Last Post: 05-11-2011, 01:34 AM
  5. April Machines
    By bigjoeinkg in forum Everlast Announcements, Contests and Promotions
    Replies: 9
    Last Post: 04-21-2011, 03:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •