New Member
Hello from Colorado!
Got my PowerPro 256 four days ago now. I live in Littleton, Colorado. I wanted a TIG because my little MIG was just not up to snuff for the 73 bobber I am building. Plus I have some plans to work with aluminum eventually. I am really diggin the projects I see going in the forums and will be sure to get some pics in of mine shortly. Completely new to TIG welding, I am sure I will be asking you for help later =)
Everlast Support Team
Welcome aboard Crows9,
It will be nice to see a bobber in progress.
The PP256 will handle all but MIG, so looks like you have rounded out your welding equipment needs.
Enjoy the forum, many talents on here if you need a hand.
Mike R.
Email: admineverlast@everlastwelders.com
www.everlastgenerators.com
www.everlastwelders.com
877-755-9353 x203
M-F 12 - 7PM PST
FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.
Member
Welcome to the forum. I know you will enjoy it much.
Thurmond
Miller Bobcat 3 Phase,
Miller Suitcase X-Treme 12VS wire feeder for the Bobcat with M-25 300A .045" gun / Bernard 400A 5/64" wire mig gun .
26 series gas cooled TIG torch, setup for quick connect to Bobcat.
17 series gas cooled Tig Torch for Low Amp Solar Tig (Direct Solar Panel Powered Tig welding)
Hobart Handler 187 Mig / Fluxcore
EVERLAST PowerUltra 205P
EVERLAST PowerTig 250 EXT 2013 Model
Posting Permissions
Reply With Quote