Share
Results 1 to 13 of 13

Thread: mts 200 and 160 specs.

Threaded View

performance mts 200 and 160 specs. 06-03-2011, 04:07 AM
performance Sorry, When I was creating... 06-03-2011, 04:22 AM
performance And some more: 06-03-2011, 04:35 AM
performance The last few: 06-03-2011, 04:35 AM
ogorir wow, I wish this had come out... 06-03-2011, 02:50 PM
Grizzly1944 Any idea on how much the... 06-03-2011, 05:02 PM
performance 1350.00 for the 200s 06-03-2011, 05:17 PM
Oleg Don , MTS160 1050-1100$... 06-03-2011, 05:29 PM
ogorir I guess I'm just not your... 06-03-2011, 07:45 PM
performance Digital and synergic aren't... 06-03-2011, 09:50 PM
Previous Post Previous Post   Next Post Next Post
  1. #1

    Default mts 200 and 160 specs.

    Rightfully, many have asked about some of the finer spec details of the 200S. I have created the following chart in hopes that it will give some better idea of the details as well as a better close up of the panel, though I have posted it before. I am going to post some "uncensored" pictures of it so you can see some of the basic detail and in comparison to the I-MIG 160/ 200.
    Last edited by performance; 06-03-2011 at 04:43 AM.

Similar Threads

  1. Table Specs???
    By nick54 in forum Everlast Plasma Cutters (PAC)
    Replies: 8
    Last Post: 09-08-2012, 04:06 AM
  2. New 200DX specs?
    By Trip59 in forum TIG Welding (GTAW/GTAW-P)
    Replies: 31
    Last Post: 06-12-2012, 03:17 PM
  3. Power I MIG 140 specs and such
    By Jules The Great in forum MIG Welding (GMAW/GMAW-P/FCAW)
    Replies: 1
    Last Post: 04-23-2012, 08:48 PM
  4. New PowerARC 160 STH specs?
    By EchoSixMike in forum Stick Welding (SMAW)
    Replies: 5
    Last Post: 02-04-2012, 10:09 PM
  5. PM 256 specs
    By 2rods in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 5
    Last Post: 03-25-2010, 02:52 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •