Share
Results 1 to 3 of 3

Thread: Project 5 from Worntorn -4 stalls , tack up aisle + Hay loft Barn Addition

  1. #1

    Default Project 5 from Worntorn -4 stalls , tack up aisle + Hay loft Barn Addition

    After renovating the old Barn we decided to add on to one end in order to create some horse stalls. We've been using 2 stalls for our own horses and 2 stalls for Boarding horses in order to generate some income to cover all of the horse related costs.

    I decided to pour a full foundation rather than do Pole construction because the old barn is on a foundation, which is why it is still good after 100 years. I like the ease of Pole barn construction, but the longevity isn't there. Once the treated poles rot out after 15 - 25 years, you have a serious problem. It really doesn't take all that long or cost all that much to build a proper concrete foundation. For this one I trenched out with the cleanout bucket on the backhoe down to hard undisturbed non organic material, which turned out to be about 2' down. Minmum concrete depth for frost protection in our area is 18", so that worked out well.

    It was a bit of a chore working down in the trench setting forms vs working on a full excavation, but this way there was not much material disturbed and way less to find a temporary storage place for.

    Glen
    Last edited by worntorn; 06-12-2011 at 08:25 PM.
    Everlast PP256
    Everlast Imig 200
    Everlast Power Ultra 205
    P&H 400 amp A.C.
    Miller 230 amp with Onan power

  2. #2
    Join Date
    Mar 2011
    Location
    The Boonies of Texas
    Posts
    420

    Default

    Quote Originally Posted by worntorn View Post
    I like the ease of Pole barn construction, but the longevity isn't there.
    Glen
    Glen on this forum shouldn't that read "but the Everlastivity isn't there."

    Sorry just in a weird mood.

    Thurmond
    Miller Bobcat 3 Phase,
    Miller Suitcase X-Treme 12VS wire feeder for the Bobcat with M-25 300A .045" gun / Bernard 400A 5/64" wire mig gun .
    26 series gas cooled TIG torch, setup for quick connect to Bobcat.
    17 series gas cooled Tig Torch for Low Amp Solar Tig (Direct Solar Panel Powered Tig welding)
    Hobart Handler 187 Mig / Fluxcore
    EVERLAST PowerUltra 205P
    EVERLAST PowerTig 250 EXT 2013 Model

  3. #3

    Default

    maybe if I had built it as a Pole barn with a Longevity welder inside it might have lasted OK
    Everlast PP256
    Everlast Imig 200
    Everlast Power Ultra 205
    P&H 400 amp A.C.
    Miller 230 amp with Onan power

Similar Threads

  1. Upcoming project...need some Duct like in a loft???
    By CGCINC in forum General Welding Questions
    Replies: 16
    Last Post: 10-24-2013, 08:52 PM
  2. Project 1 from Welderdude, a walkway addition.
    By welderdude in forum Hobyist Projects
    Replies: 2
    Last Post: 08-01-2011, 04:10 PM
  3. Project # 11 from Worntorn: Ossa Fenders
    By worntorn in forum Personal Projects (no welder required)
    Replies: 1
    Last Post: 07-27-2011, 03:13 AM
  4. Replies: 0
    Last Post: 06-20-2011, 07:54 PM
  5. Project 3 from Worntorn. restoration of 100 year old Barn
    By worntorn in forum Personal Projects (no welder required)
    Replies: 0
    Last Post: 06-11-2011, 12:41 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •