Share
Results 1 to 20 of 33

Thread: HVAC antitheft Tool/Equipment Cage - Oxide00 Project #1

Threaded View

Oxide00 HVAC antitheft Tool/Equipment... 06-16-2011, 04:17 AM
Oxide00 Here is a picture of some of... 06-16-2011, 04:20 AM
acourtjester Hi Oxide00 Sounds like you... 06-23-2011, 02:53 PM
Oxide00 Thanks acourtjester!! I'm... 06-23-2011, 05:46 PM
acourtjester I was at the LWS and the guy... 06-30-2011, 07:01 PM
everlastsupport The good side for me, I know... 06-30-2011, 09:23 PM
Oxide00 Parts of the frame... 06-16-2011, 04:22 AM
Oxide00 Bottom all framed up and... 06-16-2011, 04:43 AM
acourtjester HI oxide00 you may see about... 06-16-2011, 02:36 PM
Oxide00 acourtjester It's horrible... 06-16-2011, 05:41 PM
DaveO Congratulations to the new... 06-16-2011, 06:32 PM
Oxide00 Thanks DaveO!! 06-16-2011, 08:35 PM
acourtjester Hey Oxide00 Looking at your... 06-25-2011, 11:02 PM
everlastsupport Nice job Oxide00 ... 06-26-2011, 12:03 PM
Oxide00 Getting there ... 06-25-2011, 10:27 PM
Oxide00 Looks Nice ... 07-01-2011, 03:30 AM
Oxide00 Side Door laid out on... 06-25-2011, 10:24 PM
Oxide00 side hinge welded on ... 07-01-2011, 03:21 AM
Oxide00 Here's the partially finished... 06-16-2011, 08:57 PM
Oxide00 http://img37.imageshack.us/img... 06-23-2011, 07:28 AM
Oxide00 Top storage shelf door hinges... 06-25-2011, 10:22 PM
Brill757 Congratulations 06-30-2011, 11:23 AM
acourtjester Hey Oxide00 Are you sure... 07-07-2011, 02:23 PM
Oxide00 Hey thanks for the reply!!!... 06-30-2011, 05:40 AM
ogorir expanded metal is really high... 06-30-2011, 10:13 AM
Oxide00 http://img593.imageshack.us/im... 06-23-2011, 07:30 AM
Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Mar 2011
    Location
    Springfield, Illinois
    Posts
    139

    Default HVAC antitheft Tool/Equipment Cage - Oxide00 Project #1

    My schools HVAC class had been having some serious problems with high value equipment being stolen or disappearing. My welding class received the task of building a secure enclosure to put an end to the "sticky finger" problem. I and another student were the main fabricators for this project.
    Last edited by Oxide00; 06-25-2011 at 10:31 PM.
    Completed Midwest Technical Institute 40 week welding/pipefitting school!!
    Attending Lincoln Land Community College - Degree in Computer Programming

Similar Threads

  1. TIG and HVAC
    By ShaneJackson in forum TIG Welding (GTAW/GTAW-P)
    Replies: 13
    Last Post: 08-10-2012, 11:15 PM
  2. Project #2: Weld Cart/Tool Cabinet
    By brianscott in forum Other Custom Fabrications
    Replies: 12
    Last Post: 04-27-2012, 11:41 PM
  3. Project #1 from welderdude: parting tool holder
    By welderdude in forum Other Custom Fabrications
    Replies: 0
    Last Post: 01-27-2012, 01:42 AM
  4. Project 9 from d3javoodoo * Tool Cabinet *
    By Legacyartist247 in forum Hobyist Projects
    Replies: 0
    Last Post: 07-21-2011, 04:31 PM
  5. Reil Burner (Oxide00 Project #2)
    By Oxide00 in forum Other Custom Fabrications
    Replies: 9
    Last Post: 07-19-2011, 03:31 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •