aws weld cert G6 open root

[jojobead]

has anybody done this test with power pro 205.Not with inspector but at home .i did test with mig .035 down for root then pulse mig .035 up for cover & cap for high pressure freon tanks. would like to do one test tig root up then stick 7018 fill/cover up.then do test all tig weld up

[Wookie]

have you got your 6010 root 7018 hot n cover in 6g yet ? normally that is gone after first then the tig root 7018 hot n covers then full tig root out