Need feed back for Power Arc 140ST

[Gtig]

Things have changed for me within the past several weeks (work wise, it's all good) my quest for an AC DC tig welder with pulse needs to wait for awhile. I need a portable tig welder with 110V capability and after researching the 140ST fits the bill. I know it's fairly new, just need some feed back how you guys like it. I see a few of them on ebay just don't know if there in-stock here.

Thanks,
GTig

[performance]

Gtig,

We have received excellent response from customers about it. Also did you know the I-TIG 200 is 110/220V? Its a little more advanced and is pulse tig (DC) for a reasonable price.
They are in stock.

[Gtig]

Mark, Thanks for the reply! I did look at the I Tig 200 but I just don't need that kind of fire power for the work I'm planning on doing. I have few jobs lined up (I'm a field service engineer for local hospitals) consist of spot welding/repairs on 316L SS, Monel and carbon steel but most of the tig work (95%) will be in SS. 28 AWG up to 3/16 inch and some times rare 1/4 inch welds will pop-up with carbon steel. I need it to be light, easy to move, 110V hook-up (a must!!!) and with 220V for heavier stuff the 140ST is just the ticket. Honestly, I was thinking of getting a Thermal Arc 95S but when I started matching duty cycles and outputs it was really a no brainer! I reeeeeaaaallllly have my heart set on the 225LX for home and fab work that will come in time but not now. You mentioned you had some in-stock, which one? I Tig 200 or 140ST?

Thanks,
GTig