This morning I found the inspiration to throw together a portable camera phone mount to record video in a fabrication environment .... the issues I had with this project were portability, & stability.
Click image for larger version.  Name: IMG_0010.jpg  Views: 317  Size: 144.7 KB  ID: 3038Click image for larger version.  Name: IMG_0007.jpg  Views: 358  Size: 145.8 KB  ID: 3046Click image for larger version.  Name: IMG_0001.jpg  Views: 342  Size: 144.8 KB  ID: 3045Click image for larger version.  Name: IMG_0008.jpg  Views: 361  Size: 144.0 KB  ID: 3044Click image for larger version.  Name: IMG_0009.jpg  Views: 343  Size: 146.1 KB  ID: 3043Click image for larger version.  Name: IMG_0004.jpg  Views: 355  Size: 145.2 KB  ID: 3042Click image for larger version.  Name: IMG_0003.jpg  Views: 354  Size: 144.8 KB  ID: 3041Click image for larger version.  Name: IMG_0006.jpg  Views: 334  Size: 144.9 KB  ID: 3040Click image for larger version.  Name: IMG_0005.jpg  Views: 353  Size: 145.4 KB  ID: 3039Click image for larger version.  Name: IMG_0002.jpg  Views: 333  Size: 146.7 KB  ID: 3047

I started with an old case for my iphone 3GS & added a strip of industrial strength velcrow... then I p/u a 65 lb. magnet from harbor freight tools for 2.99. Next I welded a piece of 1" x 6" x 1/8" cold rolled steel to the base/back of magnet after sanding both sides with sand paper to ensure a good bond from the velcrow. This project took under an hour, & did not exceed $5.