"LIKE" our New contest August 25-October 25 Prize 250EXT

[jakeru]

I hope I don't actually win another Everlast contest... but hope you don't blame me for trying (because, these are so much fun!)

1. not on facebook
2. registered
3. have signature
4. have avatar
5. currently at 331 posts

[revkev6]

August 25-October 25 2011 Contest

TO ENTER:
1) “Like” our homepage on facebook. (State that you have in your official entry here on this thread).
2) REGISTER YOUR NAME ON OUR FORUM
3) FILL OUT SIGNATURE LINE
4) POST AVATAR (ASK IF YOU NEED HELP)
5) STATE YOUR CURRENT POST COUNT HERE ON THIS THREAD
6) By the end of the contest, you must have 75 MORE posts than you have at the beginning. In other words, if you have 10 at the beginning of the contest, you must have 85 at the end, not just 75 total posts.
7) Complete up to 5 additional project posts to count toward a total of 7 possible entries.
a) Projects should include: a) pictures b) details about size, dimension if applicable c) time took to complete, or estimated projection d) materials used e) discussion of why/how/what/etc was the reason you needed or wanted to do the project.
b) State: This is project 1, project 2 from _____ (your screen name), a_________ (subject matter i.e.: fence) in the title line etc.

1. Liked everlastweldersusa on facebook! pm me if you need name/details
2. registered
3. signature filled out
4. avitar poster
5. post count is 16 including this one
6. work on post count
7. add a couple of current projects I have going

[Socoj2]

0 Post
Liked on facebook
Avatar and signature set

[SeanMurphy265]

I am in at 218! Liked on Facebook, and ready to go!

[glabrador01]

Already have "Liked" Everlast on Facebook - 1 Entry
Number of current posts - 0, will have 75 soon.
Registered
have signature line
have the avatar
will post projects soon...

250ext, wow, that's a nice welder...

[Jason]

Liked everlast on facebook.. Everything else has been done.. Posts started at 175, I need 250 posts to qualify.

[performance]

Keep in mind state your starting post...Not just the amount you need to qualify.

[EmptyNester]

My name is Rege

I "liked" EverlastWeldersUSA on Facebook.
I now have a signature and avator.
My current post count is 0 - so my goal is 75+.

[hooda]

TO ENTER:
1) “Like” our homepage on facebook. (State that you have in your official entry here on this thread).

I have "liked" the homepage on facebook

2) REGISTER YOUR NAME ON OUR FORUM

I have been registered for a while now

3) FILL OUT SIGNATURE LINE

It is filled out

4) POST AVATAR (ASK IF YOU NEED HELP)

It is posted

5) STATE YOUR CURRENT POST COUNT HERE ON THIS THREAD

My current post count is 90 (ninety) That means I will need 165

6) By the end of the contest, you must have 75 MORE posts than you have at the beginning. In other words, if you have 10 at the beginning of the contest, you must have 85 at the end, not just 75 total posts.

Will do -I will need a post count of 165 MADE MY POST COUNT TO #165 AT 10:27 am ON 10-23-2011

7) Complete up to 5 additional project posts to count toward a total of 7 possible entries.

PROJECT #1 HOUSE PAINTING/SCAFFOLD BUILD
PROJECT #2 HARLEY TRANNY CRACK WELD/REBUILD
PROJECT #3 ELECTROLYTIC RUST REMOVAL EXPERIMENT
PROJECT #4 TRAILER REHAB/CUSTOM RACKING
PROJECT #5 SPRINGER FRONT FORK RESTORE
PROJECT #6 LAWNMOWER DECK REPAIR

Shouldn't be a problem

a) Projects should include: a) pictures b) details about size, dimension if applicable c) time took to complete, or estimated projection d) materials used e) discussion of why/how/what/etc was the reason you needed or wanted to do the project.
b) State: This is project 1, project 2 from _____ (your screen name), a_________ (subject matter i.e.: fence) in the title line etc.

[ogorir]

1. Liked on facebook (I thought I'd done that I long time ago, but I guess I hadn't)
2. registered
3. have signature
4. have avatar
5. 108 posts (109 including this one)

Looking forward to people's projects again. I have a few in the works and a few I didn't have a chance to post in the last contest.

[bobwills]

1. liked everlast on facebook.
2. have registed for forum
3. have a signiture
4. have a avitar
5. post count is 5 before this one
excited for the contest. hope i can get 80 posts

Progect 1: http://www.everlastgenerators.com/fo...op-inlet-grate
Project 2: http://www.everlastgenerators.com/fo...ornator-welder
Project 3: http://www.everlastgenerators.com/fo...6209#post16209 (Havnt started yet but will soon.)
Project 4: http://www.everlastgenerators.com/fo...r-log-splitter (prolly wont count for the contest cause havnt done much for even thinking about it but thought i would still put it on here)

[Haywire]

Liked your facebook account. Not entering contest though. I'd never make the post count. Good luck everyone.

Ian

[bobwills]

Not sure if ill be able to make it either. 75 sure is a lot. But you should still enter. Its a lot of fun. All i know it gets me really involved with their website. Which its suppose to do. Now I seem to be on all the time.

[performance]

Bob your on your way. Its still just a little more than a post a day...Not very hard at all.

[bobwills]

Yeah. Im doing a lot better than I figured I would already. Im surprised there hasn't been a lot more discussions started since the contest started. Guess im gonna have to find some more projects to do because they are good easy ways to get a few posts and I also do enjoy a good project. Mark you hear anything more on the next shipment of powerarc 200s. Cant wait to get mine. Be a big step up from my Lincoln 225 ac.

[performance]

Bob, They will come in with the whole order. There isn't a separate shipment for the PA's. Duncan is there now working on the order, and checking things out. It'll be done soon, but its best not to rush things, especially in China. Here, on our side we see things differently, but half of manufacturing in China is dealing with cultural "senitivity" to criticism.

[bobwills]

Ok. Im just like a little kid on christmas morning having to wait for it. lol. Im really excited. And true. Rushing things never turn out like they should. I read that they were doing testing on them. Have they made any changes to them why they are testing things or is it just to make sure everything is working right.

[performance]

Don't won't to upset this thread and make it too much more difficult to sort through than it is, but...
As far as I know, there are no changes other than the single port which snuck in on us last time....should be keeping it, as its a pleasant mistake imho. As we tell people all the units are tested at the factory before they are shipped out. When Duncan is there, he is overseeing production, and final testing.

[zoama]

Don't won't to upset this thread and make it too much more difficult to sort through than it is, but...
As far as I know, there are no changes other than the single port which snuck in on us last time....should be keeping it, as its a pleasant mistake imho. As we tell people all the units are tested at the factory before they are shipped out. When Duncan is there, he is overseeing production, and final testing.

Does Duncan speak mandarin ?

[bobwills]

Ok. I was just curious. Thankya mark