Share
Results 1 to 4 of 4

Thread: Site speed is much improved.

  1. #1
    Join Date
    Dec 2010
    Location
    Lake Stevens, WA
    Posts
    18

    Thumbs up Site speed is much improved.

    The Everlast site, including the forum, has always been slow-ish for me, but recently things changed. The entire site is much faster, easier to use and more enjoyable.
    Props to whoever made this happen!

  2. #2

    Default

    Nothing has changed on our end?? But maybe a routing issue change on the net.
    Mike R.
    Email: admineverlast@everlastwelders.com
    www.everlastgenerators.com
    www.everlastwelders.com
    877-755-9353 x203
    M-F 12 - 7PM PST
    FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.

  3. #3
    Join Date
    Dec 2010
    Location
    Lake Stevens, WA
    Posts
    18

    Default

    It was always 15-20 secs to load a page, no matter what computer I was on. Nice now.

    You missed a chance to take credit for site improvement... 8^)

  4. #4

    Default

    Only stating the truth. Nothing change on this end. Have no upgrade the software in months.
    Mike R.
    Email: admineverlast@everlastwelders.com
    www.everlastgenerators.com
    www.everlastwelders.com
    877-755-9353 x203
    M-F 12 - 7PM PST
    FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.

Similar Threads

  1. iMIG-200 speed cal
    By Rambozo in forum MIG Welding (GMAW/GMAW-P/FCAW)
    Replies: 8
    Last Post: 11-03-2016, 11:26 PM
  2. I-Mig 205 wire speed not high enough?
    By camboscams in forum MIG Welding (GMAW/GMAW-P/FCAW)
    Replies: 4
    Last Post: 01-21-2014, 02:41 PM
  3. Hello from 1945 Speed and Custom
    By dirtypetcock in forum Introduce Yourself
    Replies: 2
    Last Post: 11-24-2012, 12:54 AM
  4. I-MIG 250p Low Wire Speed
    By zoama in forum MIG Welding (GMAW/GMAW-P/FCAW)
    Replies: 8
    Last Post: 03-05-2012, 12:49 AM
  5. 250ex Pulse Speed
    By Cippee in forum TIG Welding (GTAW/GTAW-P)
    Replies: 15
    Last Post: 02-17-2012, 10:41 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •