Project 4 by redbeard: Computer Case Modifications

[redbeard]

This project filled the need to have a decent looking enclosure for our home theater PC. The metal working portion of this project involved stripping the old tower case, cutting a new hole for the power supply, cutting a panel to cover the card slots, patching the front knockout, and reorienting the drive mounting cage. This was the first "real" project I did with the plasma cutter.



The case was from my mother-in-laws late 90s computer, it was actually made quite substantially compared to modern ones.



I decided to fabricate a single cover for the card slots because I didn't want to exhaust my supply of single covers, plus it gave me more time squirting plasma.



Case after adding reinforcement to the rear corner.

[redbeard]

For some reason, I'm having problems uploading all the pics to one post so lets try it in another..



After installation of patch, mounting the cage and cutting PS hole.



The end result. Front is 1/2" MDF, sides and top are particle board since I ran short.