PP50 No trigger control

[trickbiker]

Just got in from vacation and my new 9 pin cable you me was in. I hooked it all up and I have no trigger control, it works without hitting the trigger. It's set to cut all the time but no air after I stop cutting or before. Is it something I'm doing wrong? Mickey

[performance]

We dont have 9 pin cables on pp 50's. can you explain a little further.?

[trickbiker]

Hey Mark, my bad, just a new type plug to me. The euro typ. Sorry. As soon as I turn the machine on it will cut without hitting the trigger. I have no trigger control on the gun at all. Maybe it,s me, the setup?

[trickbiker]

Mark , Should I call tech support Monday about this proglem or is this something you may be able to look into? thanks Mickey

[parkour]

Maye the switch is sticking? Maybe bad contact somewhere?

[trickbiker]

Where would there be contacts that would cause this?

[trickbiker]

Ray thanks for your time spent. They are shipping me another torch out to me with a return shipping doc for the the one they sent me. Thanks again.

Where would there be contacts that would cause this?

[Ray]

the PP50 should have the Euro type central connector.
It might be that you have the 60C torch. The trigger is wired differently than the rest.

Give me a call tomarow.