Share
Results 1 to 3 of 3

Thread: Powerultra 205 plug

  1. Default Powerultra 205 plug

    I just bought my machine on ebay.......am very excited. Does this machine have a 220v plug already installed? I know frequently machines come minus the plug because there are so many different ones. If it does have a plug, what are the specs so I can get my shop wired for it.

    Any idea what the shipping time frame for these machines are?

  2. #2

    Default

    The unit does not ship with a plug on the power cord. There are so many plugs just here in the US. We ship them to other countries as well.

    If you search the forum for "plug" you can see what people have said. Here is one link.

    http://www.everlastgenerators.com/fo...highlight=plug

    It really comes down to. If you have an outlet at can carry the current already, get a plug that matches the outlet. If you have nothing, you can pick what you like or have your electrician pick it for you.
    Mike R.
    Email: admineverlast@everlastwelders.com
    www.everlastgenerators.com
    www.everlastwelders.com
    877-755-9353 x203
    M-F 12 - 7PM PST
    FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.

  3. Default Au Contraire (sp)?

    My machine did in fact arrive with a plug in the packaging. It was not attached to the cord however. It is a 20 amp 240v plug. Is this adequate? I was thinking the machine needed 30 amp service.

Similar Threads

  1. 250ex plug question
    By shayno in forum TIG Welding (GTAW/GTAW-P)
    Replies: 1
    Last Post: 02-25-2015, 04:49 AM
  2. 255 EXT Plug for Water Cooler
    By DVA in forum TIG Welding (GTAW/GTAW-P)
    Replies: 0
    Last Post: 10-31-2014, 04:56 AM
  3. Plug welds, first try
    By DaveO in forum MIG Welding (GMAW/GMAW-P/FCAW)
    Replies: 13
    Last Post: 08-07-2013, 10:39 AM
  4. powerultra 205 vs powerultra 205p
    By travis in forum Pre-sales, Sales and Shipping questions
    Replies: 17
    Last Post: 03-22-2013, 03:08 AM
  5. What plug is this?
    By agent4573 in forum General Welder Questions
    Replies: 8
    Last Post: 12-02-2012, 02:11 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •