Combination pedal/trigger

[jerky]

i dont know if this will help, but have you though about a finger amp control? i donno if thats even what your asking about here, but heres the ck page.... http://www.ckworldwide.com/amperage_controls.htm

[todmorg]

i dont know if this will help, but have you though about a finger amp control? i donno if thats even what your asking about here, but heres the ck page.... http://www.ckworldwide.com/amperage_controls.htm

Jerky,

I'm really not sure what I am asking about yet. The situation I have is, I used to tack frames together on the jig using a mig and then move the frames to the table to tig using the pedal. I switched from my pedal only Syncrowave to an Everlast with a finger trigger and soon realized how much nicer the tig is for tacking using high amerage bursts with the trigger, but I still prefer the pedal for tube welding on the table.

Long story short- I am looking for an easy way to use one welder with the pedal for table welding and the trigger for tacking without swaping plugs and a switch every time.

This may all change with the extra control the 250EXT will deliver.