Quote Originally Posted by hooda View Post
HeyThurmond! How about make a wooden cover for the unit. I'm thinking using 2x2 construction lumber, use the small metal corner braces available at the depot (cheaper then the hardware store) to hold things together, then sandwice some fiberglass insulation between 2 layers of particle board (or get snazzy and use the "tileboard" used in bathrooms) Make the box such that you can put a light bulb fixture- I saw these ones at the big box that have a 10" aluminum reflector and plug-in on 1 end for $8.00. stick in a 60-100 watt bulb, mount a $6.00 timer so the light is on only during the cold hours, and you're in business. Total material cost-about $65.00 for EVERYTHING. This is what we used to do for the water pump at an old farn that I want to work at as a kid. Only advice I can give you is 1. put some forethought into how to keep your box firesafe (clearance for the bulb-which is why I suggested the one with the reflector). 2. If you think it through, this could be put together in such a manner as to be broken down and stored over the warm months. Good Luck!
Foil faced ridgid foam insulation and duct tape would be cheap, light and easy to break down for storage.