Share
Results 1 to 20 of 41

Thread: Powerarc 140 review

Hybrid View

atatro Powerarc 140 review 12-16-2011, 01:24 PM
performance Got any updates? 12-22-2011, 01:00 AM
atatro I tig welded a little bit... 12-23-2011, 01:39 AM
Titan winch I doubt this model will ever... 12-23-2011, 11:38 AM
everlastsupport WOW, that will be a hot... 12-23-2011, 12:03 PM
Tritium What will the 160 weigh... 12-23-2011, 01:24 PM
Titan winch The 160 will weigh 8.5kg or... 12-23-2011, 02:33 PM
atatro I'm very interested in seeing... 12-23-2011, 03:19 PM
plumber Hi- I've purchased a PA140... 01-04-2012, 08:49 PM
performance Are you on 110V? Give me a... 01-04-2012, 09:02 PM
plumber Hi Mark, Yes, I am on 110V.... 01-04-2012, 10:37 PM
performance You'll want to bump up to... 01-04-2012, 11:18 PM
Previous Post Previous Post   Next Post Next Post
  1. 12-23-2011, 01:24 PM #1
    Tritium's Avatar
    Tritium is offline Member
    Join Date
    Mar 2011
    Location
    The Boonies of Texas
    Posts
    420

    Default

    What will the 160 weigh approximately?

    Thurmond
    Miller Bobcat 3 Phase,
    Miller Suitcase X-Treme 12VS wire feeder for the Bobcat with M-25 300A .045" gun / Bernard 400A 5/64" wire mig gun .
    26 series gas cooled TIG torch, setup for quick connect to Bobcat.
    17 series gas cooled Tig Torch for Low Amp Solar Tig (Direct Solar Panel Powered Tig welding)
    Hobart Handler 187 Mig / Fluxcore
    EVERLAST PowerUltra 205P
    EVERLAST PowerTig 250 EXT 2013 Model
    Reply With Quote Reply With Quote
  2. 12-23-2011, 02:33 PM #2
    Titan winch is offline Moderator
    Join Date
    Oct 2009
    Posts
    452

    Default

    The 160 will weigh 8.5kg or 18 lbs approx.
    Cheers
    EVERLAST CANADA
    www.everlastwelders.ca
    www.titanwinches.com

    905 637 1637
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Video review of PowerArc 160 STH TIG
    By youngnstudly in forum Customer Testimonials
    Replies: 14
    Last Post: 07-09-2014, 07:02 AM
  2. Review of my new I-MIG 200.
    By 225 in forum MIG Welding (GMAW/GMAW-P/FCAW)
    Replies: 9
    Last Post: 03-10-2013, 07:42 PM
  3. Everlast PowerArc 160 STH Review
    By sirsparkalot in forum Customer Testimonials
    Replies: 2
    Last Post: 11-17-2012, 06:40 PM
  4. PowerPlasma 70 review
    By GWD in forum Everlast Plasma Cutters (PAC)
    Replies: 7
    Last Post: 12-04-2010, 12:10 AM
  5. Super Cut 50 Review
    By WAYNESWORLD in forum Everlast Plasma Cutters (PAC)
    Replies: 17
    Last Post: 12-28-2009, 03:54 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules