Share
Results 1 to 9 of 9

Thread: why does my post have to be approved by a moderator on certain threads?

  1. 01-10-2012, 08:22 PM #1
    Joe from NY's Avatar
    Joe from NY
    Joe from NY is offline Member
    Join Date
    Dec 2011
    Location
    Long Island, New York
    Posts
    235

    Default why does my post have to be approved by a moderator on certain threads?

    i usually have no problem posting on threads, but today i tried posting to a particular thread, and got a message that the moderator has to approve my post before it will show up. What is going on here? Why would a post that merely asked for an update on an issue need approval before showing on the thread? The thread in question is this one: http://www.everlastgenerators.com/fo...-5th-breakdown
    Last edited by Joe from NY; 01-10-2012 at 09:03 PM. Reason: removed baseless supposition
    Some of the crap I use to keep busy:

    Everlast 200DX
    Millermatic 211 Mig
    Hypertherm Powermax 30 plasma cutter
    Lincoln Weld-Pak 100
    Century Stick welder
    Oxy set-up with Henrob 2000 torch
    Logan 200 lathe (60 years old)
    Jet band saw
    About 6 Harbor Freight grinders with different discs/wheels/brushes
    Reply With Quote Reply With Quote
  2. 01-10-2012, 08:55 PM #2
    performance's Avatar
    performance
    performance is offline Everlast Sales and Support Team
    Join Date
    Jul 2009
    Posts
    5,371
    Blog Entries
    1

    Default

    If there is any restriction, I am not aware of it. If it is, then it is likely it is because it is intended for Everlast company use only as a announcement, or tip section, not as a free for all posting of information scalped or relayed from other websites. It is likely it was posted in the wrong section to begin with. That would not be our fault if there is a restriction.
    Last edited by performance; 01-10-2012 at 09:01 PM.
    Mark
    performance@everlastwelders.com
    www.everlastgenerators.com
    www.everlastwelders.com
    877-755-9353 x204
    M-F 9am - 5pm EST
    Reply With Quote Reply With Quote
  3. 01-10-2012, 09:02 PM #3
    Joe from NY's Avatar
    Joe from NY
    Joe from NY is offline Member
    Join Date
    Dec 2011
    Location
    Long Island, New York
    Posts
    235

    Default

    Yes, i see that now. I removed my baseless supposition so as not to cast aspersion on the board.
    Some of the crap I use to keep busy:

    Everlast 200DX
    Millermatic 211 Mig
    Hypertherm Powermax 30 plasma cutter
    Lincoln Weld-Pak 100
    Century Stick welder
    Oxy set-up with Henrob 2000 torch
    Logan 200 lathe (60 years old)
    Jet band saw
    About 6 Harbor Freight grinders with different discs/wheels/brushes
    Reply With Quote Reply With Quote
  4. 01-11-2012, 12:44 PM #4
    everlastsupport's Avatar
    everlastsupport
    everlastsupport is offline Everlast Support Team
    Join Date
    Jul 2009
    Location
    Florida
    Posts
    3,370

    Default

    Mark's correct.

    If you have something you feel needs to go in that section, feel free to send it to Mark or I and we will add it for you.
    Mike R.
    Email: admineverlast@everlastwelders.com
    www.everlastgenerators.com
    www.everlastwelders.com
    877-755-9353 x203
    M-F 12 - 7PM PST
    FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.
    Reply With Quote Reply With Quote
  5. 01-11-2012, 06:14 PM #5
    Joe from NY's Avatar
    Joe from NY
    Joe from NY is offline Member
    Join Date
    Dec 2011
    Location
    Long Island, New York
    Posts
    235

    Default

    Nah, thanks. I was only inquiring as to what was the outcome of the brother's problem with his 250EX. I dont know why that thread was in that section anyway.
    Some of the crap I use to keep busy:

    Everlast 200DX
    Millermatic 211 Mig
    Hypertherm Powermax 30 plasma cutter
    Lincoln Weld-Pak 100
    Century Stick welder
    Oxy set-up with Henrob 2000 torch
    Logan 200 lathe (60 years old)
    Jet band saw
    About 6 Harbor Freight grinders with different discs/wheels/brushes
    Reply With Quote Reply With Quote
  6. 01-11-2012, 09:41 PM #6
    everlastsupport's Avatar
    everlastsupport
    everlastsupport is offline Everlast Support Team
    Join Date
    Jul 2009
    Location
    Florida
    Posts
    3,370

    Default

    Quote Originally Posted by Joe from NY View Post
    Nah, thanks. I was only inquiring as to what was the outcome of the brother's problem with his 250EX. I dont know why that thread was in that section anyway.
    Probably why that section requires moderator approval now.

    Posting in the wrong area.
    Mike R.
    Email: admineverlast@everlastwelders.com
    www.everlastgenerators.com
    www.everlastwelders.com
    877-755-9353 x203
    M-F 12 - 7PM PST
    FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.
    Reply With Quote Reply With Quote
  7. 01-15-2012, 05:29 AM #7
    jerky's Avatar
    jerky
    jerky is offline Member
    Join Date
    Sep 2011
    Location
    Alberta, Canada
    Posts
    244

    Default

    Ya i just posted a fairly lenghly post about my plasma having an issue. It was in the technical bulliten section. I just hope it doesent go missing.
    Journeyman welder
    250EX
    Power plasma 60
    horizontal band saw
    Miller digital elite 'wicked' lid
    Reply With Quote Reply With Quote
  8. 01-15-2012, 05:38 AM #8
    Joe from NY's Avatar
    Joe from NY
    Joe from NY is offline Member
    Join Date
    Dec 2011
    Location
    Long Island, New York
    Posts
    235

    Default

    hit the back button in your browser, you might be able to get it and copy and paste to a new post. do it quick
    Some of the crap I use to keep busy:

    Everlast 200DX
    Millermatic 211 Mig
    Hypertherm Powermax 30 plasma cutter
    Lincoln Weld-Pak 100
    Century Stick welder
    Oxy set-up with Henrob 2000 torch
    Logan 200 lathe (60 years old)
    Jet band saw
    About 6 Harbor Freight grinders with different discs/wheels/brushes
    Reply With Quote Reply With Quote
  9. 01-18-2012, 04:34 AM #9
    jerky's Avatar
    jerky
    jerky is offline Member
    Join Date
    Sep 2011
    Location
    Alberta, Canada
    Posts
    244

    Default

    did it on my iphone, so no chance of getting it back.... is anyone going to look into that post or do i have to write a new one?
    Journeyman welder
    250EX
    Power plasma 60
    horizontal band saw
    Miller digital elite 'wicked' lid
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. I registered and have not been approved after days?
    By everlastsupport in forum Everlast Announcements, Contests and Promotions
    Replies: 2
    Last Post: 05-08-2018, 05:13 AM
  2. leaky gauge how to fix I've tightened hoses ,taped threads, made sure it was tight
    By cheeks in forum Introduce Yourself
    Replies: 11
    Last Post: 03-12-2013, 05:56 PM
  3. Where are the first few posts of threads
    By Racerryan in forum Forum related Questions
    Replies: 4
    Last Post: 03-03-2013, 02:20 AM
  4. Negative threads delegated?
    By FabGTO in forum Customer Testimonials
    Replies: 8
    Last Post: 04-12-2011, 05:53 AM
  5. foot pedal hook up on 205 and collet body threads
    By www in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 2
    Last Post: 05-30-2010, 02:45 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules