Share
Results 1 to 20 of 25

Thread: PP 205 won't start an arc in HF, but will when scratch?

Threaded View

Buggy Chief PP 205 won't start an arc in... 01-28-2012, 04:52 PM
posixPilot Buggy, I believe your... 01-28-2012, 07:51 PM
Buggy Chief Thanks for the suggestion... 01-28-2012, 08:40 PM
zoama If you were looking at the... 01-28-2012, 08:50 PM
posixPilot Good work, zoama ... I was... 01-28-2012, 09:45 PM
Buggy Chief Awesomeness fellas. I will... 01-28-2012, 09:48 PM
Buggy Chief Don't have a gauge. Suppose... 01-28-2012, 09:49 PM
posixPilot Geezer says that it will get... 01-28-2012, 09:55 PM
Buggy Chief Thanks Guys. Adjusted points... 01-28-2012, 10:25 PM
zoama Are you getting an arc... 01-28-2012, 11:13 PM
Buggy Chief 2t. I just experimented and... 01-28-2012, 11:18 PM
Joe from NY I would first put a voltmeter... 01-28-2012, 11:06 PM
posixPilot Buggy, another thing you... 01-28-2012, 11:17 PM
Previous Post Previous Post   Next Post Next Post
  1. 01-28-2012, 04:52 PM #1
    Buggy Chief is offline Member
    Join Date
    Dec 2011
    Posts
    169

    Default PP 205 won't start an arc in HF, but will when scratch?

    Can anyone recommend any solutions? Very frustrating as it was working flawlessly last weekend and double checked that it is in TIG mode.

    I did just wire a new outlet in because I bought a 220v welding extension cord, which required new plug. Could something be amiss here?

    Manual said that HF gaps may need to be adjusted. Not real sure how to do or what this really means?

    Any suggestions are appreciated.
    Last edited by Buggy Chief; 01-28-2012 at 05:14 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Video - TIG Lift Start (Comparison with HF and Scratch) also Razor blade welding
    By undercut in forum TIG Welding (GTAW/GTAW-P)
    Replies: 6
    Last Post: 11-22-2012, 08:18 PM
  2. Anyone doing scratch start TIG with a Power Arc ? (Adding a pedal ?)
    By someguy in forum TIG Welding (GTAW/GTAW-P)
    Replies: 12
    Last Post: 08-02-2012, 01:22 AM
  3. Has anyone built a bicycle before, from scratch?
    By CGCINC in forum General Welding Questions
    Replies: 7
    Last Post: 05-08-2012, 01:00 PM
  4. IMIG200- anyone tried Scratch start tig?
    By ogorir in forum MIG Welding (GMAW/GMAW-P/FCAW)
    Replies: 9
    Last Post: 06-12-2011, 02:04 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules