Power I-IMIG 250P questions

[Diabolical]

Can someone show me some welds done with thePower I-IMIG 250P please.

Additionally, I would appreciate any input on the machine itself.
How readily available are the consumables?
Can you change the torch?

All input is greatly appreciated.
Mike.

[performance]

The torch is either Binzel or Trafimet. These are name brand, and depending upon your local supplier can be bought locally, (and online quite easily). These are some of the nicest and most comfortable torches on the market. We use the Euro quick connect on our units. This is a universal style that every torch manufacturer I believe can make their torches in. This is the same as ESAB and others. One of our guys went and bought a profax with tweco fittings because he wanted a longer torch.

[Diabolical]

Thank you.
Do you know where I could see some welds made with the machine or some pictures?
Again, Appreciated.

Mike

[performance]

Didn't you say you are from S. Florida? Mike in tech support lives in S. FL. He has one.

[Diabolical]

Yes, I am in "The Redlands" Just outside of Miami.. Above/West of Homestead.. Everglades in my back yard.
I'm currently working at the Miami Art Museum so, I drive a little north everyday.
Just on the edge of Biscayne Bay/Miami Beach.

[SeanMurphy265]

This is with my Imig 200 12gauge sheet, the 205p is more machine with more features.

[Cippee]

How does the pulse work on thin metals. Particularly stainless and aluminum. I was wondering if you set the pulse slow won't the wire stub in the puddle durring the low amp part of the pulse?