Project twin scroll

[hokiefd]

Wow. Very impressive work.

Do you experience any heat issues with the transmission or other parts? Do you find any value to ceramic coating the hot side tubing or using a turbo heat cover in an application like this? S/F.....Ken M

I'd bet that it is fine for a car that is only driven on the street. You might run into some issue for a car that sees track (road course) duty. The portion of the manifold that crosses below the transmission looks like a tight fit!

[Tacoma747]

Nice fab work!

[EchoSixMike]

I'd bet that it is fine for a car that is only driven on the street. You might run into some issue for a car that sees track (road course) duty. The portion of the manifold that crosses below the transmission looks like a tight fit!

Yep, that's my concern. Was wondering what experience the vehicle has seen since creation of the kit or if similar setups have had issues.

Doesn't look like a serious problem, but on a vehicle with underchassis aerodynamics or flat bottom for air control, I can see that sort of plumbing being a heat problem. Which is why I ask S/F.....Ken M