Mean Green Spring Contest March 16 -June15 (11:59 pm)

[Brian Ski]

its ok really wanted a pencil set instead or crayolas

You would hurt yourself with pencils. Do like you normally do... Sit in the corner eating your crayons.... With your doll...

[Rodsmachineshop]

hahahaha good one

[undercut]

hahahaha good one

When I was a kid, I was always jealous of the kid who had hundreds of crayola colors. Now I'm jealous of Rod with his crayolas and his hundreds of customized tools!

[EchoSixMike]

OK, contest ends today, so I'm elgible with 115posts.

Have one project: http://www.everlastgenerators.com/fo...thin-C-channel

So I guess I rate 2 chances.

Thanks for the contest. S/F.....Ken M

[Brian Ski]

Well I might as well put my numbers in too....

Started at 1 post... Now 340 posts

Not a big facebook person but did get a couple replies from people, did a Like on 3/24

Some Shares on 3/29 4/16 5/1 and 6/7

Like Ken said.... Thanks for the contest.

[DaveO]

"I am entering the contest!" starting with this post, #425. Thanks, Everlast! Interesting twist- I like the one project per category idea.

>=100 posts: 1
share on FBook: 1
Like/Follow on various and sundry social media sites: 1

... so I'm in for 3. I actually had a new project in place and welded up, but it went south and I was not happy enough with it to share it here, so I'm going to tighten it up and share it later. (But I did get the 14 y.o. off the computer long enough to try MIG welding.)

Thanks again, Oleg and all the moderators! It's going to be a great Father's Day for three lucky guys in particular!

[posixPilot]

Sign me up with 88 posts and a follow on twitter.

Final post count 202.
Follow of @welderinfo on twitter.
Tweeted a URL to the everlast home page.
1 Project http://www.everlastgenerators.com/fo...ight=tool+base
+
---------------------

4 entries

Thanks!
Mike

[KSmith]

I wish to join. This post should bring me to 17! A long way to go, but I have projects ongoing, and am lusting after a 200DX.

Ending post count 137.
Five Projects:
(1) http://www.everlastgenerators.com/fo...y-Welding-Cart
(2) http://www.everlastgenerators.com/fo...-Welding-Table
(3) http://www.everlastgenerators.com/fo...Band-Saw-Stand
(4) http://www.everlastgenerators.com/fo...Wall-Sculpture
(5) http://www.everlastgenerators.com/fo...ter-Drop-Hitch

Makes total of 6 entries.

Had some fun, ken

[NRM]

Posts since start of contest = 111
Project 1 = http://www.everlastgenerators.com/fo...li-Huli-Setup)
Project 2 = http://www.everlastgenerators.com/fo...Portable-Stand
Liked on Facebook

So I guess I have 4 entries

Good luck to everyone and THANKS Everlast for the contest, can't wait for the next one.

[SeanMurphy265]

Started at 450 post ended at 650 post.
Liked on facebook and following on twitter
Youtube video Imig 200 part 1 541views
http://www.youtube.com/watch?v=zGFUL...2&feature=plcp
Part 2 - 160views
http://www.youtube.com/watch?v=n-IM7...1&feature=plcp

Project 1

Project 2

Project 3

Project 4

Project 5

Project 6

[sportbike]

Good to go on posts (entry post was the second entry back on the first page)
Liked on Facebook, like my 200DX as well :-)

I had some projects, but didn't get around to getting posts up.
Not that it is contest related, but I used the 200dx to modify the frame, add brackets to the subframe for shock reservoir and CO2 bottle, shorten teh radiator for tire clearance, modify the factory front fairing stay to now hold the battery and all electrical items, and fixed my cracked turbo header. finally got it into the 7 second zone in the1/4 mile.
Gotta love having your own tools.

I gotta give props to Sean Murphy as well. He's come a long way and seems to be making out ok for himself. Keep up the hard work.

John

[SeanMurphy265]

Good to go on posts (entry post was the second entry back on the first page)
Liked on Facebook, like my 200DX as well :-)

I had some projects, but didn't get around to getting posts up.
Not that it is contest related, but I used the 200dx to modify the frame, add brackets to the subframe for shock reservoir and CO2 bottle, shorten teh radiator for tire clearance, modify the factory front fairing stay to now hold the battery and all electrical items, and fixed my cracked turbo header. finally got it into the 7 second zone in the1/4 mile.
Gotta love having your own tools.

I gotta give props to Sean Murphy as well. He's come a long way and seems to be making out ok for himself. Keep up the hard work.

John

Thanks! I'm just now getting the skills back that I once had. I bought a welder in November 2010 and started playing around again. I had not welded for a living since 2002. Did a little bit of welding here and there, but I had not welded anything since 2006. It takes a while to relearn everything that was once second nature. The majority of time spent welding for a living was in structural steel. I did work for a family owned machine shop, and steel fabricator that did a lot of decorative iron work. The problem with structural steel is that everything is heavy and so you weld everything heavy. The stuff I do for myself is thinner lighter weight and requires some different skills. The work I have done lately has been more heavy stuff; which is what I have had the most experience doing. I would like to improve my tig welding skills, but I have not had any jobs requiring my tig welder.

[CGCINC]

Hey, Goodluck to everybody and thanks for posting all the projects, I like seeing everyone's work!
And thanks to Oleg and the crew for running these contest's and handing out 25% coupons!!



And yes, I'm on my 5th Corona so I'm just spreadin my love!!

[undercut]

Started at 0 post ended at 353 post.

Liked on facebook and following on twitter

Shared 2 Everlast related articles on Facebook - 1 on June 9 and 1 on June 15

http://www.everlastgenerators.com/fo...Welding-repair

I reckon that is good for 5 entries.

Best of luck to all!

[redbeard]

Made the post count
EL is liked on FB
Trying to get a project up now, but the site is cutting in and out on me so I figured I better get what I have on the record just to be safe.

[Rodsmachineshop]

started like 100 now at 1040 post . projects a flywheel grinding machine and plasma tracing tool . done other things but that was at work so didn't post them lol http://www.everlastgenerators.com/fo...light=flywheel

[redbeard]

UPDATE got the project posted for a total of 3.
http://www.everlastgenerators.com/fo...ed=1#post32498

What happened to the edit function?

Made the post count
EL is liked on FB
Trying to get a project up now, but the site is cutting in and out on me so I figured I better get what I have on the record just to be safe.

[redbeard]

UPDATE got the project posted for a total of 3.
http://www.everlastgenerators.com/fo...ed=1#post32498

Jeez, just realized I forgot to put the end count of 344. That would have been a silly thing to get DQed over.

[Rambozo]

Looks like I was too late to the party to make it in time.
Maybe next contest. I'm still saving for a new machine anyway, and haven't quite made a decision on what to get. 25% off would have helped that a little bit.

[DaveO]

>=100 posts: 1
share on FBook: 1
Like/Follow on various and sundry social media sites: 1

... so I'm in for 3. I actually had a new project in place and welded up, but it went south and I was not happy enough with it to share it here, so I'm going to tighten it up and share it later. (But I did get the 14 y.o. off the computer long enough to try MIG welding.)

Thanks again, Oleg and all the moderators! It's going to be a great Father's Day for three lucky guys in particular!

Realized I should have mentioned my ending post count: 538. The "Edit" button appears to have taken the weekend off.