I sold my other smoker, so it's time to build another one! This one is going to be a little smaller, it's 4'tall x 2'wide and will be insulated. I hope to get the majority of the smoker finished this weekend.
Senior Member
Project #2 Mean Green Contest -- Insulated Smoker!
I sold my other smoker, so it's time to build another one! This one is going to be a little smaller, it's 4'tall x 2'wide and will be insulated. I hope to get the majority of the smoker finished this weekend.
Lincoln Eagle Engine Drive
Everlast MTS 250
Everlast Power Tig 225lx
HTP Mig 2400
Everlast Power Plasma 60C --> Just need to finish my CNC Plasma Table!
Miller Spectrum 375 Extreme Plasma cutter
Victor cutting torch
HF 20 Ton Shop Press
HF 4x6 Band Saw
HF Air Compressor
Northern Tool Drill Press
www.murphywelding.com
Member
What are you insulating it with?
Benjamin
Owner of IMIG 200 and half owner of Power Plasma 50
https://www.facebook.com/BenjaminRootPhotography
New Member
Any new pictures of this project?
I have a masterbuilt that I bought a few years ago and would sometimes like to have something bigger.
I might have to try building one sometime.
Consistency is a good thing....unless you're consistently an idiot.
Miller Matic 185
Thermal Dynamics Pak Master 38xl
Everlast 250EX
Senior Member
I am using roxul that I had left over from Lowes
I should have some more pics tomorrow, I've been going back and forth between this smoker and plasma table.
Lincoln Eagle Engine Drive
Everlast MTS 250
Everlast Power Tig 225lx
HTP Mig 2400
Everlast Power Plasma 60C --> Just need to finish my CNC Plasma Table!
Miller Spectrum 375 Extreme Plasma cutter
Victor cutting torch
HF 20 Ton Shop Press
HF 4x6 Band Saw
HF Air Compressor
Northern Tool Drill Press
www.murphywelding.com
Senior Member
Got some more work done today.
Lincoln Eagle Engine Drive
Everlast MTS 250
Everlast Power Tig 225lx
HTP Mig 2400
Everlast Power Plasma 60C --> Just need to finish my CNC Plasma Table!
Miller Spectrum 375 Extreme Plasma cutter
Victor cutting torch
HF 20 Ton Shop Press
HF 4x6 Band Saw
HF Air Compressor
Northern Tool Drill Press
www.murphywelding.com
Senior Member
I have 2 more top pieces to tack on and I will have the inside skinned. It will be Monday before I get to weld it together. I tacked everything together with my PowerArc 140st.
I will be cutting it close on materials so I am using all my drops for the inside top layer.
Lincoln Eagle Engine Drive
Everlast MTS 250
Everlast Power Tig 225lx
HTP Mig 2400
Everlast Power Plasma 60C --> Just need to finish my CNC Plasma Table!
Miller Spectrum 375 Extreme Plasma cutter
Victor cutting torch
HF 20 Ton Shop Press
HF 4x6 Band Saw
HF Air Compressor
Northern Tool Drill Press
www.murphywelding.com
New Member
Looking good. What you figure at least 5 brisketts in there. Or maybe about 4 cows worth of ribs. LOL
Everlast Power Tig 200DX
Thermal Arc Fabricator 181I
Giant Tech 4800X Plasma
Glenn-Roberts Classic Buzzbox
New Member
Sean--- I'm surprised you don't list all those welding magnets in your tag line. I've never seen that many at a welding supply house!!
There is no safe direction to point an unsafe gun.
PowerPro 205
Hobart 250HF
Powcon 300ST
gas stuff
14x60 Hercules Ajax lathe
Gorton I-22 MastrMil
Landis 6x18 surface grinder
20" Powermatic bandsaw
Ancient, big drill press
350 pound anvil and a bunch of hammers
If I can't fix it I can make it.....unrecognizable.
Senior Member
I have to break down and build a welding table! Those magnets help keep things in line when you don't have a table.Originally Posted by JBnID
Lincoln Eagle Engine Drive
Everlast MTS 250
Everlast Power Tig 225lx
HTP Mig 2400
Everlast Power Plasma 60C --> Just need to finish my CNC Plasma Table!
Miller Spectrum 375 Extreme Plasma cutter
Victor cutting torch
HF 20 Ton Shop Press
HF 4x6 Band Saw
HF Air Compressor
Northern Tool Drill Press
www.murphywelding.com
New Member
SO true. I got very lucky not long ago and got a four by eight foot, with one inch steel top welding table. Right now it's sitting and waiting on a slab to sit it on (with the backhoe.) So, the welding table is outside and I don't have magnets. You still got me beat!
What's your heat source for the smoker?
There is no safe direction to point an unsafe gun.
PowerPro 205
Hobart 250HF
Powcon 300ST
gas stuff
14x60 Hercules Ajax lathe
Gorton I-22 MastrMil
Landis 6x18 surface grinder
20" Powermatic bandsaw
Ancient, big drill press
350 pound anvil and a bunch of hammers
If I can't fix it I can make it.....unrecognizable.
Senior Member
Charcoal / wood with a water pan.
Lincoln Eagle Engine Drive
Everlast MTS 250
Everlast Power Tig 225lx
HTP Mig 2400
Everlast Power Plasma 60C --> Just need to finish my CNC Plasma Table!
Miller Spectrum 375 Extreme Plasma cutter
Victor cutting torch
HF 20 Ton Shop Press
HF 4x6 Band Saw
HF Air Compressor
Northern Tool Drill Press
www.murphywelding.com
New Member
Yummy!! Sausage and ham on the top racks and turkeys on the bottom. The very best of recycling.
There is no safe direction to point an unsafe gun.
PowerPro 205
Hobart 250HF
Powcon 300ST
gas stuff
14x60 Hercules Ajax lathe
Gorton I-22 MastrMil
Landis 6x18 surface grinder
20" Powermatic bandsaw
Ancient, big drill press
350 pound anvil and a bunch of hammers
If I can't fix it I can make it.....unrecognizable.
Senior Member
Got some work done today! I have the outside skinned, still have to skin the top and build the door.
Lincoln Eagle Engine Drive
Everlast MTS 250
Everlast Power Tig 225lx
HTP Mig 2400
Everlast Power Plasma 60C --> Just need to finish my CNC Plasma Table!
Miller Spectrum 375 Extreme Plasma cutter
Victor cutting torch
HF 20 Ton Shop Press
HF 4x6 Band Saw
HF Air Compressor
Northern Tool Drill Press
www.murphywelding.com
Posting Permissions
Reply With Quote
