I sold my other smoker, so it's time to build another one! This one is going to be a little smaller, it's 4'tall x 2'wide and will be insulated. I hope to get the majority of the smoker finished this weekend.
Senior Member
Project #2 Mean Green Contest -- Insulated Smoker!
I sold my other smoker, so it's time to build another one! This one is going to be a little smaller, it's 4'tall x 2'wide and will be insulated. I hope to get the majority of the smoker finished this weekend.
Lincoln Eagle Engine Drive
Everlast MTS 250
Everlast Power Tig 225lx
HTP Mig 2400
Everlast Power Plasma 60C --> Just need to finish my CNC Plasma Table!
Miller Spectrum 375 Extreme Plasma cutter
Victor cutting torch
HF 20 Ton Shop Press
HF 4x6 Band Saw
HF Air Compressor
Northern Tool Drill Press
www.murphywelding.com
Member
What are you insulating it with?
Benjamin
Owner of IMIG 200 and half owner of Power Plasma 50
https://www.facebook.com/BenjaminRootPhotography
New Member
Any new pictures of this project?
I have a masterbuilt that I bought a few years ago and would sometimes like to have something bigger.
I might have to try building one sometime.
Consistency is a good thing....unless you're consistently an idiot.
Miller Matic 185
Thermal Dynamics Pak Master 38xl
Everlast 250EX
Senior Member
I am using roxul that I had left over from Lowes
I should have some more pics tomorrow, I've been going back and forth between this smoker and plasma table.
Lincoln Eagle Engine Drive
Everlast MTS 250
Everlast Power Tig 225lx
HTP Mig 2400
Everlast Power Plasma 60C --> Just need to finish my CNC Plasma Table!
Miller Spectrum 375 Extreme Plasma cutter
Victor cutting torch
HF 20 Ton Shop Press
HF 4x6 Band Saw
HF Air Compressor
Northern Tool Drill Press
www.murphywelding.com
Senior Member
Got some more work done today.
Lincoln Eagle Engine Drive
Everlast MTS 250
Everlast Power Tig 225lx
HTP Mig 2400
Everlast Power Plasma 60C --> Just need to finish my CNC Plasma Table!
Miller Spectrum 375 Extreme Plasma cutter
Victor cutting torch
HF 20 Ton Shop Press
HF 4x6 Band Saw
HF Air Compressor
Northern Tool Drill Press
www.murphywelding.com
Senior Member
I have 2 more top pieces to tack on and I will have the inside skinned. It will be Monday before I get to weld it together. I tacked everything together with my PowerArc 140st.
I will be cutting it close on materials so I am using all my drops for the inside top layer.
Lincoln Eagle Engine Drive
Everlast MTS 250
Everlast Power Tig 225lx
HTP Mig 2400
Everlast Power Plasma 60C --> Just need to finish my CNC Plasma Table!
Miller Spectrum 375 Extreme Plasma cutter
Victor cutting torch
HF 20 Ton Shop Press
HF 4x6 Band Saw
HF Air Compressor
Northern Tool Drill Press
www.murphywelding.com
Posting Permissions
Reply With Quote
