custom exhaust 4 lancer gts

[jerky]

started working on my exhaust last night and today, should have most of it done tommorrow. made out of 2.5" .065" wall 304L ss tubing. i started out by taking off the stock muffler, removing the rubber mounts for use on the new one. i cut the old flange off because its a bullnose flange, not a flat face. i welded the flange to a straight piece of tube to get me by for the night so no fumes would go right into my car. that was last night. today i cut the straight piece off, and made a wye ( Y ) bend. i didnt have a template to cut the tube, so i just made two 45 degree bends, then cut them in half, and welded them together to make a perfect 45 wye. after the wye was done, i welded it to the flange piece. i started making the one pipe, its all ready to go on, but i called it a night. tommorrow i should have the other side done, both welded onto the wye, and the tips nicely beveled. i dont have any rod for hangers, so its just kinda hanging by some stainless wire. ill pick some rod up monday and make hangers.. also NO i didnt back purge, YES I KNOW no need to say anything, and i already know the welds dont look amazing, but they will do for me.