Everlast 210EXT review and pictures

[GUNNER]

I think the 250ex is the best tig welder you can buy , have use helium with it also some times when welding thick aluminum head puts out some real heat . had my Denise my friend stop by at the shop he owns a welding shop and he used my 250 to see how it welds , he liked it better than his miller

Miller makes a lot of different welders... Which one ?

[zoama]

So how long before Jody gets the videos up ?

Now you are just speculating on this Zoama and this is how rumours get started , first one post and then someone else posts up and the next thing you know the Queen even had a hand in working on it.

Actually Oleg is discussing possibly seeing if Todd might be possibly agree to doing some Videos for us.

This machine looks familiar... could it be ???

[redbeard]

This machine looks familiar... could it be ???

I dunno, I see 3 Hobarts, a Miller and something on the left that might have green sides. The panel almost looks right, but I'm just not getting a clear enough view. The torch is not the same as Todd's either.

[Titan winch]

Yes I thought those specs on the Can site were a little on the high side. The 210EXT looks like a decent machine but so far I'm content with my 250EX for now.

We are having a bit of a problem with the Web people and getting the conversion from Metric to imperial . In fact if you have a look now you will see it is showing 1/16" max weld.
I would just as soon leave this blank for now as i will be working on the Owners Manual at the factory in a couple of weeks .

And Zoama there you go again with the Speculating hmmm.

[zoama]

And Zoama there you go again with the Speculating hmmm.

Sherlock Holmes had a picture of me on his wall.

[Geco]

We are having a bit of a problem with the Web people and getting the conversion from Metric to imperial.

You can send me the specs, and I'll help you do the conversion
I'd rather the metric specs anyway.

[todmorg]

Just an update on the 210ext, there was a very small glitch in the programming due to our 60hz power ( this was not found or diagnosed by me ), They shipped another welder with the modified programming and it has been working great. I did switch to a 17 torch, just because I like the regular round handled torches, but over all, it's been a good welder.

You get used to these digital welders real fast, I went to our other shop and was using the 250EX that we have there, and even though its a great welder, it felt strange to not have digital settings.

[Oleg]

This machine looks familiar... could it be ???

James , you're right

This clip was done by WeldingTipsAndTricks using our new 210EXT model

More videos to come .. will go head to head with Lincoln Invertec V205-T (retail 3200$ with TIG package )

.. Stay tuned !!!

[Jake98]

Now I'm no Sherlock Holmes, but how is it that Zoama can edit Oleg's posts?? (I'm gonna stay on his good side, seeing that...) one of them must be Harry Houdini.

[zoama]

Now I'm no Sherlock Holmes, but how is it that Zoama can edit Oleg's posts?? (I'm gonna stay on his good side, seeing that...) one of them must be Harry Houdini.

Oleg is a very busy man so in the short time he had to post, he mistakenly called me John. I help him out as one of the moderators of this forum. I'm not an employee of Everlast.

[Jake98]

Got it Harry..

[MoparCar]

Srp

we will update the site in a week with all specs

Ummmm......still waiting on those specs..... Anytime soon for the updated site?

[performance]

Duncan has completed the manual...It's loaded to the site. It should have all the specs, plus we have put a tutorial video of it up on youtube, that covers all the specs, step by step.

[MoparCar]

Duncan has completed the manual...It's loaded to the site. It should have all the specs, plus we have put a tutorial video of it up on youtube, that covers all the specs, step by step.

I reviewed the manual. Am I missing the specs such as pulse, frequency, balance, etc. the general features specs? I saw the general specs such as volts, amps, duty cycle, etc. but not the features. Am I missing these?

[performance]

Watch the video, because it goes over all of that.

[MoparCar]

Thanks Mark-I'll watch it again. Good Video!
I was hoping the specs would be in writing or in a chart so I could do a side by side comparison to the other Everlast models on my wish list.
No problem, I'll take another look at it.

Are you still doing pre-sales with a discount on the 210 EXT?

[MoparCar]

Just an update on the 210ext, there was a very small glitch in the programming due to our 60hz power ( this was not found or diagnosed by me ), They shipped another welder with the modified programming and it has been working great. I did switch to a 17 torch, just because I like the regular round handled torches, but over all, it's been a good welder.

You get used to these digital welders real fast, I went to our other shop and was using the 250EX that we have there, and even though its a great welder, it felt strange to not have digital settings.

So are all the 210 EXTs in shipment, etc. correct for 60 HZ?
Todd, overall how do you like this welder compared to the 250 EX? I guess what I'm asking if the cost were not an object would you do the digital 210 EXT or would you go with a comparable amp DX/EX/LX machine such as the 200 DX OR 225 LX? I'm asking you since you're one of the few that has used the 210 EXT plus knows the "classic" non-digital versions. I have no problems with the digital control vs. knobs. Thanks!
Thanks...

[2tailfins]

Any idea when this is going to be added to the US site?

[Oleg]

Any idea when this is going to be added to the US site?

should be in few days

[performance]

should be in few days

IF the webmasters will speed it up, it will be done tonight I hope.
But if they don't...and make any mistakes...well...

The units are just around the corner though.