Share
Results 1 to 5 of 5

Thread: New kid on the block ,Great company, this company Everlast.

  1. #1
    Join Date
    Mar 2012
    Location
    London,Ontario,Canada
    Posts
    2

    Default New kid on the block ,Great company, this company Everlast.

    Hi Everyone ,
    This is my first post, I just recently purchased a MTS 200S welder .
    Hooked it up and everything works just fine.What a piece of engineering.
    I purchased a 125 cu ft Argon Tank from AirGas in Port Huron. Good folks.
    Also want to say how impressed I was with the service I received from the sales folks .Above and beyond the call of duty.
    I have a workshop building on my property which after 7 years is a respectable machine shop.(Just got to get another tool,Sound familiar) Hmmm, maybe a plasma cutter for my birthday .
    About me , Married 25 years to a wonderful wife ,3 great kids and truly blessed of God. I did property management and maintenace for 25 years Motto ,If its busted I'll fix it. but now spend more time helping people.
    I drove tractor trailer for a few years so I got to see all of North America ( Except New YorK city, which was OK) Never had a accident,ticket ,but only by the grace of God Now semi retired ,Work in my shop and do honey doo lists.
    I have two interesting hobbies , I'm a bible historian Thats someone who researches and collects old bibles.,its been a passion of mine for the past 20 years. Favorite bible ,The Self Interpreting Bible .Mine is 1824
    2 The past few years I have been working on research and development of a new energy technology,and writing two books,keeps me out of trouble. (I like the movie National Treasure)
    Best regards to all, Alan
    Last edited by AL Doucette; 03-31-2012 at 04:09 PM.
    Everlast MTS 200s MIG,TIG, ARC welder
    Ellis drill press 9400 with xy table ballbearig chuck power downfeed
    16" X 20" Lathe/Mill Combo
    Enco Milling Drilling Machine
    Craftex 7in X 12in Bandsaw
    48" Grizzly Pan & Box Brake 12Ga.
    12" Sheet Metal Shear ,
    HF ring roller .HF 12 Ton press HF Concrete jack Hammer
    4 Air compressors, 3 grinding machines
    10" Table saw
    4 X 36 belt sander
    Wood Lathe 14in X 43in
    10" sliding wood cut off saw

  2. #2
    Join Date
    Mar 2012
    Location
    Darwin/ Northern Territory/ Australia
    Posts
    40
    Blog Entries
    1

    Default

    Welcome to the Forum from Australia
    Scotty


    250ex
    W 300
    CAT D4D Dozer 49J
    Welded Products Brake Press 30 Tonne
    Tos-Hostivar Tool & Cutter Grinder
    Invicta Major shaper (1.2m stroke)
    Oldfield & Schofield (lathe 1941 young) 5m bed,1.2m gap swing
    CIG Transmig 275
    Lincoln Weldanpower 225DC + 3.5kw 240AC v (Diesel Powered)

  3. #3

    Default

    Welcome to the forum from a fellow Truck driver. Unfortunatly I am still in the profession.
    Everlast Power Tig 200DX
    Thermal Arc Fabricator 181I
    Giant Tech 4800X Plasma
    Glenn-Roberts Classic Buzzbox

  4. #4

    Default

    Welcome to the site you will find alot of smart and talented people here willing to share their talents with each other. What type of energy tech are you working on solor and are the books your writing about it?
    Bill

  5. #5
    Join Date
    Mar 2012
    Location
    London,Ontario,Canada
    Posts
    2

    Default

    Hi Bill , Your 67 "Cuda" looks pretty sharp. I once had a 67 blue Belair I called "the Boat" because it seemed to float driving on the road.I would tend to agree with you about a lot of smart and talented folks on this forum and yes one of the books is about my project . No ,its not solar. Can't say much more right now.
    The only thing I can say is when you make small acomplishments and progress in what ever you do in life, use it as an excuse as I do to celebrate with your loved ones. I have taken my family out many times to Red Lobster or for Chinese food.
    Alan
    Everlast MTS 200s MIG,TIG, ARC welder
    Ellis drill press 9400 with xy table ballbearig chuck power downfeed
    16" X 20" Lathe/Mill Combo
    Enco Milling Drilling Machine
    Craftex 7in X 12in Bandsaw
    48" Grizzly Pan & Box Brake 12Ga.
    12" Sheet Metal Shear ,
    HF ring roller .HF 12 Ton press HF Concrete jack Hammer
    4 Air compressors, 3 grinding machines
    10" Table saw
    4 X 36 belt sander
    Wood Lathe 14in X 43in
    10" sliding wood cut off saw

Similar Threads

  1. I've heard great things about the customer support at Everlast
    By dumbwelder in forum TIG Welding (GTAW/GTAW-P)
    Replies: 15
    Last Post: 02-24-2017, 03:33 AM
  2. Everlast power I tig 200 review, high quality, great tig welder
    By francocali in forum TIG Welding (GTAW/GTAW-P)
    Replies: 1
    Last Post: 03-08-2011, 07:12 PM
  3. Replies: 1
    Last Post: 03-07-2011, 05:34 PM
  4. Just Purchased EX 250 Tig Machine for my Company
    By dynapac in forum TIG Welding (GTAW/GTAW-P)
    Replies: 4
    Last Post: 01-22-2010, 04:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •