Everlast, I need a different torch. Which one to buy?

[225]

To whom it may concern,

What is the smallest air cooled torch that can buy from you guys? A WP17?

Do you guys have them in stock?

[zoama]

I suggest the CK130 with a superfex cable in whatever length you need and a 35-70 dinse.
There is a huge difference between WP-9 copys and the ck130 even though they are the same size.
The wp-9 is rated @125 amp DC 60% duty cycle and only 80 amp AC @ 60% duty cycle.
The CK130 is rated @ 130 amp for both AC and DC @100% duty cycle. The superflex cable is light and as limp as a wet noodle.
I use mine to 150 amps @ 60% duty cycle > http://www.everlastgenerators.com/fo...ad-on-my-PP256

[225]

What was wrong with arc zone? Who could I buy it through?

[zoama]

What was wrong with arc zone? Who could I buy it through?

Every time I buy from them I get a bunch of excuses about delays... turns out they're just ordering from ck when they get an order then shipping to the customer.
You can order from them and you'll get what you wanted... I just got irked at the lies and condescending tone from them. I ordered a CK210 with cable and dinse from "Machine and Welding" in Greenville SC. They beat arczone's price by $50
I'm not sure if they sell over the internet but here's their website http://www.mwsc.com/ CK says this company sells a high volume of their products.
If your 200dx uses the small dinse order part# SL2-25LG and it will come with a gas quick connect for everlast machines. Whoever you order from may say they don't recognize that part number but they can get it from CK.

Edit: Arc-zone may do better now, the owner Jim Watson sent me loads of emails after our ordeal (even after I asked him to stop) but I didn't read them, so don't let me stop you from giving them a chance.

[225]

Thanks. Did the torch come ready to go? Or do I have to buy special consumables for the "2" series torch?

I want a Pyrex cup and also the regular stuff with a #10 cup.

[zoama]

Thanks. Did the torch come ready to go? Or do I have to buy special consumables for the "2" series torch?

I want a Pyrex cup and also the regular stuff with a #10 cup.

The same consumables for a wp-9 fit the 2 series torches, I use a small gas lens (generic) with ck wedge collets for everything. If you want ck wedge collets, get them when you buy the torch.
I buy consumables from http://www.weldingcity.com/ they have very good prices.