derusting metal

[Rodsmachineshop]

sharing my knowledge lol . a easy way to make metal like new and remove rust

[Brian Ski]

sharing my knowledge lol . a easy way to make metal like new and remove rust

You will love this... Easy way to remove rust. Off garden tools and easily loosen rusted bolts. Just let them sit for a while.
I thought this was crazy until I did some reading on it on the net. Lot of info out there on it. This guy built a tank large enough for big car parts. Like the frame.

http://www.stovebolt.com/techtips/ru...t_molasses.htm

[Rodsmachineshop]

reverse electrolysis works better just need washing soda and a battery charger . throw the rust piece in a plastic tub fill with water add some washing soda . hook negative charger lead to part to derust and positive on a chunk of metal , turn on charger at 10 amps removes every bit of rust . . just make sure chunk of metal dont touch part cleaning. its call reverse de-plating http://antique-engines.com/electrol.asp have a cylinder head soaking rite now doing this since rusted solid and cam locked up in head from rust

[Brian Ski]

reverse electrolysis works better just need washing soda and a battery charger

What is washing soda???? Ah... See it at your link...

[Rodsmachineshop]

its like baking soda but stronger safe to use . you can get it at your local super markets . I use it for getting whites clean when washing close safer than bleach on whites

[undercut]

its like baking soda but stronger safe to use . you can get it at your local super markets . I use it for getting whites clean when washing close safer than bleach on whites

So where else in the Internet can you learn vital welding skills, use molasses and get your whites whiter!

Great tips everyone.

I've never used reverse electrolysis before. Have never felt easy putting charged wires into water. I should try it, though. Will get the rust out of the areas that are hard to get to otherwise.

[Slartybartfa]

Washing soda is sodium carbonate, baking soda is sodium bicarbonate. Washing soda can be found in market among the household cleaners and laundry detergents. It is more caustic (has a higher pH) than baking soda and is pretty aggressive. However I prefer phosphoric acid if you can get it. Driveway cleaners made for removing rust stains from concrete contain phosphoric acid. So does Naval Jelly. Best if you can heat it while derusting. It leaves a flat gray-ish colored iron phosphate deposit that is a good surface for accepting a primer coat if you want to paint over it.

[ncsugrad2006]

reverse electrolysis works better just need washing soda and a battery charger . throw the rust piece in a plastic tub fill with water add some washing soda . hook negative charger lead to part to derust and positive on a chunk of metal , turn on charger at 10 amps removes every bit of rust . . just make sure chunk of metal dont touch part cleaning. its call reverse de-plating http://antique-engines.com/electrol.asp have a cylinder head soaking rite now doing this since rusted solid and cam locked up in head from rust

Duddde, that's awesome. Is it ever done on large parts, like car frames or something?

[EchoSixMike]

Duddde, that's awesome. Is it ever done on large parts, like car frames or something?

Parts recovered from the Titanic and Monitor have been cleaned with this method. Seen it being done. One was a Dahlgren cannon, substantially larger than a car. S/F.....Ken M

[ncsugrad2006]

Parts recovered from the Titanic and Monitor have been cleaned with this method. Seen it being done. One was a Dahlgren cannon, substantially larger than a car. S/F.....Ken M

Cool.. I had never heard of it for some reason

[posixPilot]

http://www.stovebolt.com/techtips/ru...t_molasses.htm

I've heard of using Coke to remove rust before, but molasses is a new one to me. Anyone tried the cola approach?

Cheers
Mike

[posixPilot]

turn on charger at 10 amps removes every bit of rust . .

What do you set your arc force to? .... Oh, wait, you said charger ... Forget I said anything . Great link, thanks Rod.

Cheers
Mike