I-Mig Welders

[NRM]

Everlast (anyone who works there) what is the most popular model in the I-Mig line?

What models do others on this site have and what are the pros, cons and would you purchace another model if you had to di it over again?

I am interested in getting a I-Mig 200 but want opinions from other forum members.

[Rodsmachineshop]

I have the i mig 205 , with the spool gun - the 200 is nice but i want a mig that holds 44 pound spool since save you on money on wire and 160 amps to me is a little small for what i weld . as for wire a 12 pounds spool price to a 44 pound roll price is like only 12 dollars difference saves a lot of money if you weld a lot . was going to get the 250 i mig but it is not set up to use a spool gun .

[performance]

Uhh...yes it is. Canadian models may not be, but the US ones are. Earlier models were not, but current ones are:
[IMG]file:///C:%5CUsers%5CMark%5CAppData%5CLocal%5CTemp%5Cmsoht mlclip1%5C01%5Cclip_image001.png[/IMG] http://www.everlastgenerators.com/Po...-p-385-pd.html

[NRM]

Rod thanks for the info. I will have to look at the price of wire here to compare. What are the dimensions of your I-Mig 205?

[Oleg]

Rod thanks for the info. I will have to look at the price of wire here to compare. What are the dimensions of your I-Mig 205?

I-MIG205 and I-MIg205P top two models we sell both in stock !

[Rodsmachineshop]

Oleg 205 welds great after you get use to adjusting it

[Rodsmachineshop]

length 20 1/4 width 12 3/4 and 14 high not including handles add about 4 inch with handles up

[geezer]

I have 2 Imig 205,,,and one spool gun,,,if I was to buy another mig welder it would probably be another Imig 205,,,the welder is big enough for most any job and can be run off a genset,,, it does decent stick,,,has arc force,,,is light enough to move around and has proven to be reliable,,,can run 10 lbs spools or 44 lb spool of wire...truth be know since I got my first one I'm migging just about everything,,,hardly stick weld anymore,,have a PA 200 for that and a 250EX that sit there collecting dust...