I-Mig Welders

[redbeard]

What was your plan for mixing ?

Going to look for some affordable, high-res flowmeters (if such a thing exists) while keeping my eyes peeled for a steal on a Smith proportional mixer. I'm not really needing anything highly accurate in the forseeable future.

[zoama]

Going to look for some affordable, high-res flowmeters (if such a thing exists) while keeping my eyes peeled for a steal on a Smith proportional mixer. I'm not really needing anything highly accurate in the forseeable future.

What gas mixtures ?

[Rodsmachineshop]

Redbeard i use this to mix my gas hook argon to one inlet and helium to other then i hook my tig torch to the outlet when you want more helium just turn the open hot knob more lol

[redbeard]

What gas mixtures ?

Ar/CO2 for now, I'm thinking up to 90/10 is probably doable. He may come later.

Redbeard i use this to mix my gas hook argon to one inlet and helium to other then i hook my tig torch to the outlet when you want more helium just turn the open hot knob more lol

I actually ran across a thread a while back where somebody was serious about using a faucet in that manner!

[NRM]

Rod I like your setup.

[Rodsmachineshop]

I saw a place some were on the internet were a guy from Australia made his own home made mixer have to see if i can find it again . I would like one for tig welding aluminum home made mixer http://weldingweb.com/showthread.php?t=45450 or here but no price http://www.oxyfuelsafety.com/ez_DynP...FUHDtgodGjdBrQ

[Rambozo]

Didn't Jody have a video about the parts required to build a cheap simple gas mixer?

[Rodsmachineshop]

Rambozo find it and post were Jody has it on the internet please

[zoama]

Didn't Jody have a video about the parts required to build a cheap simple gas mixer?

Rambozo find it and post were Jody has it on the internet please

Here's the only one I see... it's on helium/argon

[Rodsmachineshop]

thanks Zoama cool video

[redbeard]

Always on the spot with the appropriate video from Jody. You really need to teach us how to do that.

[zoama]

Always on the spot with the appropriate video from Jody. You really need to teach us how to do that.

Google "weldingtipsandtricks subject" for instance "weldingtipsandtricks gas mixer"... without the quotation marks.

[SeanMurphy265]

Zoama how about making a video about the Imig 250?

[zoama]

Zoama how about making a video about the Imig 250?

I don't feel qualified to do a good job of it. Maybe Mark will do one soon.

[Rambozo]

Rambozo find it and post were Jody has it on the internet please

I guess it wasn't all in one place. That was one video, and here is another page where he gave the Western part number for the Y with valves. (#411)
http://www.weldingtipsandtricks.com/...um-welder.html
http://www.weldfabulous.com/p-71121-...stern-411.aspx

[redbeard]

I guess it wasn't all in one place. That was one video, and here is another page where he gave the Western part number for the Y with valves. (#411)
http://www.weldingtipsandtricks.com/...um-welder.html
http://www.weldfabulous.com/p-71121-...stern-411.aspx

Dang that's a helluva hole. Wonder how it got there.

Most of what I'm seeing makes it look like the Ar/He isn't as picky about percentages as Ar/CO2, bummer.