Got my new 200DX today will try it out on Sunday (got a show tomorrow) ... Everything looks awesome! Best packaging job I've ever seen from China ... Can't wait till I start laying beads! THANKS Oleg!
YES! Finally it's here!
Got my new 200DX today will try it out on Sunday (got a show tomorrow) ... Everything looks awesome! Best packaging job I've ever seen from China ... Can't wait till I start laying beads! THANKS Oleg!
Powertig 200DX
Lincoln 180c
Hobart Handler 125
Miller Thunderbolt
and a bunch of other tools
Senior Member
Congratulations, Winky! We all expect GREAT things from you now that you have such a great tool to work with.Originally Posted by Winky
Got my new 200DX today will try it out on Sunday (got a show tomorrow) ... Everything looks awesome! Best packaging job I've ever seen from China ... Can't wait till I start laying beads! THANKS Oleg!
Feels a bit like Christmas around here now, huh!
Is it OK to want to break something just so that you can weld it back together?
Everlast PowerTIG 185 Micro IGBT AC/DC Welder
Yep ... Christmas ... can't wait to play with my new toy ... uh ... tool
Powertig 200DX
Lincoln 180c
Hobart Handler 125
Miller Thunderbolt
and a bunch of other tools
Everlast Support Team
If you have any questions post up or give us a call. If you got it on a Friday I can imagine the excitement to fire it up.
Mike R.
Email: admineverlast@everlastwelders.com
www.everlastgenerators.com
www.everlastwelders.com
877-755-9353 x203
M-F 12 - 7PM PST
FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.
In fact ... we were going to do a outdoors bike event today but we woke up to rain so ... guess what I'm going to be doing today instead.
Powertig 200DX
Lincoln 180c
Hobart Handler 125
Miller Thunderbolt
and a bunch of other tools
I just fired up my 200DX for the first time running some beads on some 1/8" mild steel set DCEN using 3/32" lantanated ... argon flow about 18 to 20 L best results around 85 to 90 amps worked really well ... I was having a little trouble getting the arc to initiate ... actually had to make contact to start ... will arc force have any effect on that or is that strictly for stick? I may need to go inside and adjust the gap ... if so how long will it take for the capacitors to discharge? I really don't like getting knocked for a loop.
Powertig 200DX
Lincoln 180c
Hobart Handler 125
Miller Thunderbolt
and a bunch of other tools
Senior Member
Cup size and litres are the same until you get near 150 amps then bump up the litres by 1,,,check this out http://www.ckworldwide.com/technical.htm
Fantastic ... thanks ... here is how my welding station looks nowHow cool is this?
Powertig 200DX
Lincoln 180c
Hobart Handler 125
Miller Thunderbolt
and a bunch of other tools
Member
A 200DX ready to go...I am envious. Nice mix of tools there.Fantastic ... thanks ... here is how my welding station looks now
ken
UNT 520D plasma/stick/tig; Hobart Handler 140 Mig; HF 80amp stick welder; Victor O/A; 4x6 Horizontal bandsaw; Planishing hammer; & Stuff
Senior Member
Way cool. Nice looking setup you got there. So everything is going OK now?
Is it OK to want to break something just so that you can weld it back together?
Everlast PowerTIG 185 Micro IGBT AC/DC Welder
Will work with it more tomorrow ... I sure like it so far ... haven't tried the pedal yet, been running 2T ... I'm sure the start up issue is me ... not the machine. Tomorrow I'm going to set the AC Freq @ 100 and the balance at 65 and try my hand at aluminum ... I have some 1/8 flat stock to play with ... I'll set the amps around 90 or so and see how that works ... this is really a GR8 machine I know I will be making some cool things in short order with it.
Powertig 200DX
Lincoln 180c
Hobart Handler 125
Miller Thunderbolt
and a bunch of other tools
Posting Permissions
Reply With Quote