Will Everlast ever venture off into the engine driven welder market? I've looked some online and some the ones from over seas look pretty neat.
Will Everlast ever venture off into the engine driven welder market? I've looked some online and some the ones from over seas look pretty neat.
Lincoln Eagle Engine Drive
Everlast MTS 250
Everlast Power Tig 225lx
HTP Mig 2400
Everlast Power Plasma 60C --> Just need to finish my CNC Plasma Table!
Miller Spectrum 375 Extreme Plasma cutter
Victor cutting torch
HF 20 Ton Shop Press
HF 4x6 Band Saw
HF Air Compressor
Northern Tool Drill Press
www.murphywelding.com
Just curious about the reasons you are looking into this. I know you often have the generator and your trusty PA200 with you out in the field. Are you looking to streamline what you need to haul out, the weight and cut down on some wires too?
Is it OK to want to break something just so that you can weld it back together?
Everlast PowerTIG 185 Micro IGBT AC/DC Welder
We have had a number of discussions and it is something that is a viable product for future consideration. We have started looking at some options but we are a long way from commiting to anything at this point in time. I doubt we will be in a position to offer anything this year but then again you never can tell
Cheers
Mo-Power! I had ran across some pages from some factories in China and some of them looked interesting. What I have now is fine, but I am always looking at ways to reinvest and grow as I can.
http://www.arcweldinggenerator.com/w...or/850893.html
Lincoln Eagle Engine Drive
Everlast MTS 250
Everlast Power Tig 225lx
HTP Mig 2400
Everlast Power Plasma 60C --> Just need to finish my CNC Plasma Table!
Miller Spectrum 375 Extreme Plasma cutter
Victor cutting torch
HF 20 Ton Shop Press
HF 4x6 Band Saw
HF Air Compressor
Northern Tool Drill Press
www.murphywelding.com
Mo-Power? 'nuff said. That is a good enough justification for about anything in my book ....![]()
Is it OK to want to break something just so that you can weld it back together?
Everlast PowerTIG 185 Micro IGBT AC/DC Welder
EVERLAST 250 EX , EVERLAST I-MIG 205 , EVERLAST spool gun NOW have 2 EVERLAST POWER PLASMA 50 plasma cutter's , LINCOLN 175HD MIG WELDER , VICTOR TORCH SET and many more tools to many to list
Hook it through the hood like a blower!!!!!
I think the market gets pretty limited... If you get separate units you can always use the welder in the shop. (without the generator) and the generator can be used elsewhere. The ones I have seen only have power for a small load. Not near their capacity in an outlet.
Shade tree MIG welder.
Now a Shade tree TIG welder.