Member
And the winner is........ME. LOL (At least that is what I am praying)
Judging from the last contest I would say in a few days or as soon as Oleg gets a chance. I am actually more anxious for the next contest to start (which seems kind of weird to me... but I am).
Everlast PowerTig 200DX
Everlast Supercut 50P
I need a MIG.... which one to buy:
I-Mig 160, I-Mig 200, or a MTS 160
Member
chirp..... chirp chirp............. chirp
Sure is quite in here.
Everlast PowerTig 200DX
Everlast Supercut 50P
I need a MIG.... which one to buy:
I-Mig 160, I-Mig 200, or a MTS 160
Was that an echo? LOLOriginally Posted by ShaneJackson
chirp..... chirp chirp............. chirp
Sure is quite in here.
Powertig 200DX
Lincoln 180c
Hobart Handler 125
Miller Thunderbolt
and a bunch of other tools
Member
ummmm.... I must of stepped on a frog...... yea yea that's it. It was a frog.
Gosh he must have been a swamp frog cause he STINKS!!
Everlast PowerTig 200DX
Everlast Supercut 50P
I need a MIG.... which one to buy:
I-Mig 160, I-Mig 200, or a MTS 160
Are you sure it wasn’t cricket? They go chirp, chirp … frogs go croak. Maybe you croaked a cricket.
Powertig 200DX
Lincoln 180c
Hobart Handler 125
Miller Thunderbolt
and a bunch of other tools
Member
lol yea never heard a frog go chirp chirp..
Sure would be nice to find out something on this contest. I had hoped to know something already. I have to make my move on a new machine very soon (today or tomorrow).... oh well....
Everlast PowerTig 200DX
Everlast Supercut 50P
I need a MIG.... which one to buy:
I-Mig 160, I-Mig 200, or a MTS 160
Senior Member
Frogs down here in Florida go chirp chirp...
Trip Bauer
Former USN HT
Everlast 200DX New Model
Hobart Handler 125 MIG
Van Norman #12
Atlas 12" engine lathe
'98 RoadKing - 84 Ironhead - 59 Ironhead
Really? Strange place this Florida ...every where I've been it sounds more like rrrribit. Guess I'll have to visit Florida someday to listen to the chirping frogs. Come to think of it if you get hundreds of them together the croaking can sound a little like a deep throated bunch of chirps ... lmao.
Powertig 200DX
Lincoln 180c
Hobart Handler 125
Miller Thunderbolt
and a bunch of other tools
Member
humm... none of the Everlast team seems to notice that the contest is over? Seem only 3 of us are checking back on a regular basis... or the others are just being very quiet.
Everlast PowerTig 200DX
Everlast Supercut 50P
I need a MIG.... which one to buy:
I-Mig 160, I-Mig 200, or a MTS 160
It does seem a little strange Shane, I'm not going to stress over it too much. The contest didn't cost me anything and I've read a lot of great posts and learned a few things; they will get around to posting at some point ... in the meantime I'll just sit here on the edge of my work bench stool and think up a new project to submit for the next contest. Have a great day my friend.
Powertig 200DX
Lincoln 180c
Hobart Handler 125
Miller Thunderbolt
and a bunch of other tools
Everlast Sales and Support Team
Long contests take a long time to go through. Oleg is aware.
Mark
performance@everlastwelders.com
www.everlastgenerators.com
www.everlastwelders.com
877-755-9353 x204
M-F 9am - 5pm EST
Senior Member
It's like the calm before the storm.
All things come to he who waits.
We love to expect, and when expectation is either disappointed or gratified, we want to be again expecting.
Samuel Johnson
Everlast hasn't forgotten ... it'll be sprung on us when we least expect it .... Cheers!
Is it OK to want to break something just so that you can weld it back together?
Everlast PowerTIG 185 Micro IGBT AC/DC Welder
Member
SEMA 2012..... no wonder we haven't heard anything. I have done shows before and I know what goes in to the prep work for a big show. And it isn't just before the show, it usually takes a while after the show for things to return to normal.
Hope the show is a big success and Everlast stay swamped with big orders for weeks!
Everlast PowerTig 200DX
Everlast Supercut 50P
I need a MIG.... which one to buy:
I-Mig 160, I-Mig 200, or a MTS 160
Senior Member
That does explain a lot. Shows are a necessary evil. Quite exhausting but it is a great way to get exposure.
Is it OK to want to break something just so that you can weld it back together?
Everlast PowerTIG 185 Micro IGBT AC/DC Welder
Senior Member
I heard on the grapevine that the draw will be on Monday. Good luck to all!
Is it OK to want to break something just so that you can weld it back together?
Everlast PowerTIG 185 Micro IGBT AC/DC Welder
Member
Did the "Grapevine" mention what Monday that would be??? LOL
Everlast PowerTig 200DX
Everlast Supercut 50P
I need a MIG.... which one to buy:
I-Mig 160, I-Mig 200, or a MTS 160
Everlast Sales and Support Team
Oleg sent me a message to say that it would be drawn tomorrow around lunch time.
Mark
performance@everlastwelders.com
www.everlastgenerators.com
www.everlastwelders.com
877-755-9353 x204
M-F 9am - 5pm EST
Senior Member
I guess the grapevine I was using was a bit withered. Should have used the crystal ball .... !
Is it OK to want to break something just so that you can weld it back together?
Everlast PowerTIG 185 Micro IGBT AC/DC Welder
Administrator
Hey Guys...
i am finally "back" , will do drawing later today !
GOOD LUCK TO ALL
Oleg Gladshteyn
Phone: 650 588 8082 / 877 755 WELD
Cell: 415 613 6664 ONLY IF YOU REALLY NEED IT
Email: oleg@everlastwelders.com
Website www.everlastgenerators.com
www.linkedin.com/pub/oleg-gladshteyn/48/b08/875
Administrator
Guys .. see the attachment.
this are the people that will be included in the drawing tonight
if i missed anyone PLEASE let me now asap !!
Oleg Gladshteyn
Phone: 650 588 8082 / 877 755 WELD
Cell: 415 613 6664 ONLY IF YOU REALLY NEED IT
Email: oleg@everlastwelders.com
Website www.everlastgenerators.com
www.linkedin.com/pub/oleg-gladshteyn/48/b08/875
Posting Permissions
Reply With Quote
