boogers and peanut butter welds but a lot of fun...Means are justified by the ends...
I just though I'd throw a propject on the board since I love my 205 so much...
I used a spool-gun and SS wire and standard shield gas (90-10) although the welds are dark and ugly pentration was great... A lot of the stands are buildt with old bed rails, ths is 316L no paint or rust... The tops of the kegs were cut out with a Jig I made (the first one took about 40 minutes using a dremel, 2"inch cut off and 4" grinder) The first jig cut took about 30 sec using plasma....The kid designed the stand with some sugjestings from me... I think working with metal and working your sons in the garage.... doesn't get any better.... And really now,,,, when they're old enough to enjoy a cigar and some ice cold home brew......
here's the link....
http://www.homebrewtalk.com/f51/aces...thread-247512/
Reply With Quote