Replacement gas nozzle

[DaveO]

I was at a supplies website the other day, and noticed they had replacement gas nozzles for the Binzel torch on the IMIG 200. The original nozzle is working fine, just wanted a spare as backup. I wasn't at home so couldn't measure or pull a part number, and wound up ordering a nozzle just a touch smaller than the original.

I'm out of town so I can't test it... what's the effect of having a slightly smaller gas nozzle?

[DaveO]

Finally a) had a chance to test this and b) remembered to do it. The answer is "no visible difference".

[johnson697]

what website did you get it from?

[DaveO]

The site is here:
http://www.weldingdepot.com/

Prices look very reasonable- the nozzle I bought was $3, for instance.

[performance]

Harbor freight and ssome tsc's have them.

[CGCINC]

Hey Dave,

Do you have a part number from that website? I need a new nozzle but they list several

[everlastsupport]

Harbor Freight has them (only ones they carry so no part number needed), like Mark mentioned. I think it is 2 for $10.

http://www.harborfreight.com/catalog...q=mig%20nozzle

Any LWS has them, just take yours in with you, they will have plenty of them