Hi Guys,
I just received my PT185. I am looking at what I need to do to wire it. It is a dual voltage unit. I currently do not have 220v plug in the garage but will run one in the future. The manual says to use a 6-50p plug. Is this correct for the PT185? When I run the 220v does it need to be on a 50 amp breaker or will 30amp suffice? It looks like the unit will not draw more than 30 amps.

I was planning to use a 220v plug such as the 6-50p on the unit itself then create or buy a pigtail with a 6-50r to 5-15p.

Thanks,
Joe