Share
Page 2 of 2 FirstFirst 12
Results 21 to 28 of 28

Thread: video review of the 200DX

  1. #21

    Default

    Good Video! I like the one on "How to make a steel rose" too- Very cool
    Everlast PowerTig 200DX (Ordered-Waiting to arrive!)
    Everlast Supercut 50P


    Fortune Favors the bold.

  2. #22

    Default

    Quote Originally Posted by 2tailfins View Post
    Good Video! I like the one on "How to make a steel rose" too- Very cool
    Thanks ... I like doing videos The only complaint people seemed to have with the original review was that the music bed was too high and it was interfering with the dialog so I brought the volume down about 40% and it helped. I could have done it without a sound track but I write and perform all my own music and it’s a way to showcase it.
    Powertig 200DX
    Lincoln 180c
    Hobart Handler 125
    Miller Thunderbolt
    and a bunch of other tools

  3. #23

    Default

    Better Winky and you still got the music in there. Not sure if I saw the steel rose video, off to look.
    Mike R.
    Email: admineverlast@everlastwelders.com
    www.everlastgenerators.com
    www.everlastwelders.com
    877-755-9353 x203
    M-F 12 - 7PM PST
    FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.

  4. #24

    Default

    Quote Originally Posted by everlastsupport View Post
    Better Winky and you still get the music in there. Not sure if I saw the steel rose video, off to look.
    Thanks Mike ... here is the link to help you find it http://youtu.be/2N01D3rbgwA Notice I showed my love for the 200DX. Still not perfect with TIG yet but I'll get there. I did throw the rose hard on the floor 3 times to make sure it was solid lmao.
    Powertig 200DX
    Lincoln 180c
    Hobart Handler 125
    Miller Thunderbolt
    and a bunch of other tools

  5. #25
    Join Date
    Oct 2010
    Location
    Northern Virginia
    Posts
    1,323

    Default

    Finally got a chance to look at this over the weekend, nicely done. Very impressed with the music- is it your band? Are you doing multiple tracks all by yourself? Very tight, very well produced. Hear hear!
    DaveO
    Oxweld oxy acet gear
    IMIG 200
    PowerTIG 210 EXT... Amazing!

  6. #26

    Default

    Quote Originally Posted by DaveO View Post
    Finally got a chance to look at this over the weekend, nicely done. Very impressed with the music- is it your band? Are you doing multiple tracks all by yourself? Very tight, very well produced. Hear hear!
    You guessed it ... multi-trckworkvia an old out of date computer ... I do everything ... actually at one point music was my life ... I have a degree in music/mass comunication and crtification as an audio engineer. Used to play rock when I was a youngster ... but mellowed over the decades, Stayed at the top 10 of the easy listening charts for my area at Reverb Nation for a while www.reverbnation.com/winkybrazzil
    Powertig 200DX
    Lincoln 180c
    Hobart Handler 125
    Miller Thunderbolt
    and a bunch of other tools

  7. #27
    Join Date
    Oct 2010
    Location
    Northern Virginia
    Posts
    1,323

    Default

    Quote Originally Posted by Winky View Post
    actually at one point music was my life ... I have a degree in music/mass comunication and crtification as an audio engineer. Used to play rock when I was a youngster
    Very cool- I knew I was hearing some string bending in there. The music was putting me in mind of Jethro Tull, for some reason, or maybe David Gilmour's solo music- lots of good guitar work.
    DaveO
    Oxweld oxy acet gear
    IMIG 200
    PowerTIG 210 EXT... Amazing!

  8. #28

    Default

    Quote Originally Posted by DaveO View Post
    Very cool- I knew I was hearing some string bending in there. The music was putting me in mind of Jethro Tull, for some reason, or maybe David Gilmour's solo music- lots of good guitar work.
    Wow ... Thanks Dave ... those are awesome complements as Floyd and Tull were some of my major influences … I had played guitar since the early
    60’s and I picked up woodwinds when I was in my 40’s … Ian Anderson knocks my socks off.
    Powertig 200DX
    Lincoln 180c
    Hobart Handler 125
    Miller Thunderbolt
    and a bunch of other tools

Similar Threads

  1. Video review of PowerArc 160 STH TIG
    By youngnstudly in forum Customer Testimonials
    Replies: 14
    Last Post: 07-09-2014, 08:02 AM
  2. Video Review Stick Welding With PowerTig 200 DX
    By cbmkr in forum Stick Welding (SMAW)
    Replies: 7
    Last Post: 02-28-2013, 02:41 AM
  3. Wintertime Contest Video Review #1 - Agent4573
    By agent4573 in forum Hobyist Projects
    Replies: 5
    Last Post: 12-19-2012, 05:28 PM
  4. Everlast 160 STH Video Review
    By jp2code in forum Multi-Process Units (TIG,Stick,Plasma/MIG,TIG,Stick Combo units)
    Replies: 1
    Last Post: 07-03-2012, 10:04 PM
  5. Everlast 210 ext Review Video
    By jp2code in forum TIG Welding (GTAW/GTAW-P)
    Replies: 5
    Last Post: 06-13-2012, 08:25 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •