Good Video! I like the one on "How to make a steel rose" too- Very cool
Good Video! I like the one on "How to make a steel rose" too- Very cool
Everlast PowerTig 200DX (Ordered-Waiting to arrive!)
Everlast Supercut 50P
Fortune Favors the bold.
Thanks ... I like doing videos The only complaint people seemed to have with the original review was that the music bed was too high and it was interfering with the dialog so I brought the volume down about 40% and it helped. I could have done it without a sound track but I write and perform all my own music and it’s a way to showcase it.
Powertig 200DX
Lincoln 180c
Hobart Handler 125
Miller Thunderbolt
and a bunch of other tools
Better Winky and you still got the music in there. Not sure if I saw the steel rose video, off to look.
Mike R.
Email: admineverlast@everlastwelders.com
www.everlastgenerators.com
www.everlastwelders.com
877-755-9353 x203
M-F 12 - 7PM PST
FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.
Thanks Mike ... here is the link to help you find it http://youtu.be/2N01D3rbgwA Notice I showed my love for the 200DX. Still not perfect with TIG yet but I'll get there. I did throw the rose hard on the floor 3 times to make sure it was solid lmao.
Powertig 200DX
Lincoln 180c
Hobart Handler 125
Miller Thunderbolt
and a bunch of other tools
Finally got a chance to look at this over the weekend, nicely done. Very impressed with the music- is it your band? Are you doing multiple tracks all by yourself? Very tight, very well produced. Hear hear!
DaveO
Oxweld oxy acet gear
IMIG 200
PowerTIG 210 EXT... Amazing!
You guessed it ... multi-trckworkvia an old out of date computer ... I do everything ... actually at one point music was my life ... I have a degree in music/mass comunication and crtification as an audio engineer. Used to play rock when I was a youngster ... but mellowed over the decades, Stayed at the top 10 of the easy listening charts for my area at Reverb Nation for a while www.reverbnation.com/winkybrazzil
Powertig 200DX
Lincoln 180c
Hobart Handler 125
Miller Thunderbolt
and a bunch of other tools
Powertig 200DX
Lincoln 180c
Hobart Handler 125
Miller Thunderbolt
and a bunch of other tools