What Torch Head?

[In Utopia]

Just bought a PP50, the number on the torch is WSD60P.
Is this is the same as an S45?
If not, what do I look for in the way of consumables and a roller set up.

[sportbike]

post up a picture of the torch.

[performance]

You've got the wrong torch unless it was a special order High freq unit. Not sure what's up.

[In Utopia]

post up a picture of the torch.

Here you go, and this wasn't special ordered.

[everlastsupport]

Post up pictures of the unit as well (the front) please.

[In Utopia]

My son has the 3-1 50 combo, and he has the same torch.

[zoama]

That's not a PP50 , it's a Supercut 50... a much lower priced mosfet machine. That's the right torch for this machine.

[ShaneJackson]

My Supercut 50P should be here Wednesday. I was planing on ordering some consumables for it but was wondering what I should be getting. In other words what parts wear out the fastest. I don't want to order a ton of ceramic shield cups if they tend to last a long time. Any advice?

[zoama]

My Supercut 50P should be here Wednesday. I was planing on ordering some consumables for it but was wondering what I should be getting. In other words what parts wear out the fastest. I don't want to order a ton of ceramic shield cups if they tend to last a long time. Any advice?

I replace the tip and electrode in sets. The cup lasts forever unles you break it. Wherever you order from be sure to get small tips. you can request .9 or 1mm, I would go with .9 here's an example http://www.ebay.com/itm/90pcs-SG-55-...item19caca6e96.