Share
Results 1 to 5 of 5

Thread: Greetings Folks

  1. Default Greetings Folks

    Hi, I would like to introduce myself. I am an advent Offroad hobbyist that builds and modifies my own Buggys. I bought one of the China combo Plasma cutter welder off Ebay a few years ago and it only lasted a little over a year before the Plasma cutter and Tig welder stop working. It appears to be the HF arc board however I can not find one for this model. Since then I have been looking at the Everlast product line because it comes with a 5 year Warranty and appears to have good support. So here I am.

  2. #2

    Default

    Welcome aboard.
    2013 250EX : SSC Pedal : I-MIG 250P 20' Profax gun : Power Plasma 60 p80 torch : 3M Speedglas 9100XX : Evolution Rage 3 DB cold saw

  3. #3

    Default

    Quote Originally Posted by Odyknuck View Post
    Hi, I would like to introduce myself. I am an advent Offroad hobbyist that builds and modifies my own Buggys. I bought one of the China combo Plasma cutter welder off Ebay a few years ago and it only lasted a little over a year before the Plasma cutter and Tig welder stop working. It appears to be the HF arc board however I can not find one for this model. Since then I have been looking at the Everlast product line because it comes with a 5 year Warranty and appears to have good support. So here I am.
    Our combo units are great. We have been selling them for years and as you see you are not going anywhere. Welcome to the forum. What unit did you guy? Was it a Cherry (i) unit?
    Mike R.
    Email: admineverlast@everlastwelders.com
    www.everlastgenerators.com
    www.everlastwelders.com
    877-755-9353 x203
    M-F 12 - 7PM PST
    FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.

  4. #4

    Default

    Welcome to the forum. I was considering a PowerUltra 205 myself but ended up going with a SuperCut 50P (Ebay $429) and a PA140ST (Amazon $249). The cost was less and if one goes out I am not out the other. If I had to do it over I would probably go with the I-Tig 200 (Amazon $580). It would be a little more than a combo unit but gives more features.
    Everlast PowerTig 200DX
    Everlast Supercut 50P
    I need a MIG.... which one to buy:
    I-Mig 160, I-Mig 200, or a MTS 160

  5. Default

    Quote Originally Posted by everlastsupport View Post
    Our combo units are great. We have been selling them for years and as you see you are not going anywhere. Welcome to the forum. What unit did you guy? Was it a Cherry (i) unit?
    If your refering to the broken unit it is an Accurate Tools 3 n 1. I originally won the 50 Amp Plasma cutter however they did not have any in stock so they offered me the combo unit. Unfortunatly it took them shipping me 3 of them before i got one that actually worked out of the box. So much for thinking I got a great deal. If your refering to an Everlast purchase I have not bought one as of yet.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •