PowerPro 205 connectors for new torch.

[Ray C]

Hi All...

I have a PowerPro 205 and am thinking of getting another torch (CK 17 or similar) thats smaller and maybe flexible. Just want to know/verify if the power connectors on the PP 205 are DINSE 1/2". The stud sticking out measures 1/2" dia but this is my first time working with DINSE connectors and don't know the measurements or terminology (I've also heard of DINSE type A & B). Also wonder if anyone knows a good source for the small gas connector quick release chucks.

Beginning to find-out that life can be difficult when dealing with a large type 26 torch in tight quarters. Any thoughts about Flex head Vs. the CK FlexLoc? Is it safe to assume the flex tube types slowly creep and change position? And finally, are there any other pictures of the units sold by Everlast (WP17F15 and WP17FV15) show on this page?: http://www.everlastgenerators.com/Ev...ig-Torches.php.

If I go with a CK package, I'm guessing you need to purchase DINSE and gas connectors (another 80 bucks?) making the Everlast torches more affordable...


Thanks for putting-up with all the questions...

Ray

PS: Still running the Power Pro 205 about 1-2 hours a day and its holding-up just fine.

[performance]

Ray,
There is a wp17 in the video we did about our torches. http://www.youtube.com/watch?v=WrDg5hRXY6c&feature=plcp