Need to find a bolt....

[CGCINC]

I'm looking for a 5/8"-27 thread bolt to fit an old microphone I'm restoring.

I'm wanting to make a custom stand for it so if I can find a bolt that will thread into it, I can weld the stand to that.

[Rambozo]

I'm looking for a 5/8"-27 thread bolt to fit an old microphone I'm restoring.

I'm wanting to make a custom stand for it so if I can find a bolt that will thread into it, I can weld the stand to that.

5/8"-27 is standard mic stand thread, any boom or column will have that thread.

[CGCINC]

5/8"-27 is standard mic stand thread, any boom or column will have that thread.

I know nothing about this stuff...just redoing a Mic for my wifes rock n roll room.

I was wanting a bolt or threaded rod so I could weld it to the stand I make.... I guess the column is the rod from the base to the mic?
Maybe I'll go to the local music shop and see what they have

[Rambozo]

Unless you want something really odd, you can probably just find an off the shelf mic stand that will work good for you. One place where you can find a lot of older style models is your local pawn shops. If you want something to attach to what you already have, you can get a short extension or a gooseneck adapter from your local music shop.

[CGCINC]

Unless you want something really odd, you can probably just find an off the shelf mic stand that will work good for you. One place where you can find a lot of older style models is your local pawn shops. If you want something to attach to what you already have, you can get a short extension or a gooseneck adapter from your local music shop.

Ok.. thanks for the help.

I actually am wanting to make something crazy, not a typical rod and base....just not sure what yet. I think I will go to the pawn shop, didn't think of that!

[Trip59]

You could always buy a die or have someone with a lathe spin one out for you if you can't find the shape/material you're looking for...

Trip