in the same Club-bar where I made bar stools, I was asked to do something special on the scene at the entrance to the dressing room strippers
Today brought the creature and equipment in place, tomorrow I will install
in the same Club-bar where I made bar stools, I was asked to do something special on the scene at the entrance to the dressing room strippers
Today brought the creature and equipment in place, tomorrow I will install
Ruslan
EVERLAST Power Tig 255 EXT
EVERLAST PP256
PC300
EWM Pico 162
MERKLE mobimig 180K
SELCO Genesis 352 pme
You are a man will a lot of talent, no doubt about that.
Some of those lies people tell about me, are true
Ruslan, that thing is awesome.
Do you have any pictures of the build?
I hope you are being paid well for your efforts as they are quite impressive.
Руслан, что вещь является удивительным.
Есть ли у вас фотографии строить?
Я надеюсь, что вам платят и за ваши усилия, поскольку они являются весьма впечатляющими.
Everlast 200DX
Everlast PT185
Shoptask 3-in-1 (not currently in my garage, but I own it...)
Any day on a motorcycle like this that ends just needing parts and labor is a good day.
4.82, 158.67mph 1/8th mile 7.350, 200.35mph 1/4 mile
If by "stripper" you mean women who remove their clothes, this will be quite interesting for the club!
I think you are referring to just a bathroom. Google Translate told me so.
Если под "зачистки" Вы имеете в виду женщин, снять одежду, это будет очень интересно для клуба!
Я думаю, что вы имеете в виду только ванная комната. Google Translate мне сказал.
Everlast 200DX
Everlast PT185
Shoptask 3-in-1 (not currently in my garage, but I own it...)
Any day on a motorcycle like this that ends just needing parts and labor is a good day.
4.82, 158.67mph 1/8th mile 7.350, 200.35mph 1/4 mile
if to photograph assembly process that at me on phone there will be no place on a memory card
of course I get paid for my work
this thing will be hanging over the entrance to the stage, to the left of the entrance dressing room for women (who show a striptease) from the right on the stage pole (pylon) on which they revolve(I also did a pylon)
thanks for dubbing in Russian, very nice and I understand exactly what you are saying
Ruslan
EVERLAST Power Tig 255 EXT
EVERLAST PP256
PC300
EWM Pico 162
MERKLE mobimig 180K
SELCO Genesis 352 pme
Forget about assembly photos .... fill your phone with photos of the girls next to the new bird
;-)
Забудьте о сборке фотографий .... заполнить телефон с фото девушек рядом с новой птицей
;-)
Everlast 200DX
Everlast PT185
Shoptask 3-in-1 (not currently in my garage, but I own it...)
Any day on a motorcycle like this that ends just needing parts and labor is a good day.
4.82, 158.67mph 1/8th mile 7.350, 200.35mph 1/4 mile
As always great job. I like the shocks, pegs and seats on the stools. The monster is great. How did you carve out the head. Teeth look not to hard.
Как и всегда. Мне нравится, что потрясений, штифты и мест в табуреты. Этот монстр. Надеемся вы привлечет в головке блока цилиндров. Внешний вид зубов не жесткий.
Mike R.
Email: admineverlast@everlastwelders.com
www.everlastgenerators.com
www.everlastwelders.com
877-755-9353 x203
M-F 12 - 7PM PST
FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.
Fantastic work! I was hoping for a picture with the dragon's wings attached! Super nice. Thanks for sharing your work with us.
Is it OK to want to break something just so that you can weld it back together?
Everlast PowerTIG 185 Micro IGBT AC/DC Welder
today installed this creature
Ruslan
EVERLAST Power Tig 255 EXT
EVERLAST PP256
PC300
EWM Pico 162
MERKLE mobimig 180K
SELCO Genesis 352 pme
Wow. It is a bit larger than I originally thought. If you get back and can take a few overall shots once it is fully installed, post them up on here as well.
Wow. Это немного больше, чем я думал. Если вы вернетесь и может занять несколько общих снимков, когда он будет полностью установлена, размещать их на здесь.
Everlast 200DX
Everlast PT185
Shoptask 3-in-1 (not currently in my garage, but I own it...)
Any day on a motorcycle like this that ends just needing parts and labor is a good day.
4.82, 158.67mph 1/8th mile 7.350, 200.35mph 1/4 mile
Ruslan
EVERLAST Power Tig 255 EXT
EVERLAST PP256
PC300
EWM Pico 162
MERKLE mobimig 180K
SELCO Genesis 352 pme
Finally got you see you smile, all it took was a poll. Project looks great, last picture a little scary. Was the second to the last picture involved before the last picture... You made my day, very funny.
Mike R.
Email: admineverlast@everlastwelders.com
www.everlastgenerators.com
www.everlastwelders.com
877-755-9353 x203
M-F 12 - 7PM PST
FYI: PP50, PP80, IMIG-200, IMIG-250P, 210EXT and 255EXT.
Absolutely amazing! I bet it will look even scarier with the right night time lighting.
Long arc, short arc, heliarc and in-the-dark!
WOW!!!~!!!QQQ!!~#E%$%#$##@EWEWSWQ!~!~!!!!
That's the coolest thing I have seen so far!!
How in the world do you even start to make something like that?!?
We NEED build pics...
PowerTig 250EX
Power I-MIG 200
Power Plasma 50
It's what you learn, After you know it all, that counts!
PowerTig 250EX
Power I-MIG 200
Power Plasma 50
It's what you learn, After you know it all, that counts!
Everlast...The welder used in the finest strip joints across the world.
Mark
performance@everlastwelders.com
www.everlastgenerators.com
www.everlastwelders.com
877-755-9353 x204
M-F 9am - 5pm EST
Ok, but Hobart?
LOL yea he is using his hobart....
Everlast PowerTig 200DX
Everlast Supercut 50P
I need a MIG.... which one to buy:
I-Mig 160, I-Mig 200, or a MTS 160